On 03/02/15 20:25, Bjorn Andersson wrote: > > += SUBNODES > + > +The RPM exposes resources to its subnodes. The below bindings specify the set > +of valid subnodes that can operate on these resources. > + > +== Regulators > + > +Regulator notes are identified by their compatible: > + > +- compatible: > + Usage: required > + Value type: <string> > + Definition: must be one of: > + "qcom,rpm-pm8058-regulators" > + "qcom,rpm-pm8901-regulators" > + "qcom,rpm-pm8921-regulators" > + > +- vdd_l0_l1_lvs-supply: > +- vdd_l10-supply: > +- vdd_l13_l16-supply: > +- vdd_l14_l15-supply: > +- vdd_l17_l18-supply: > +- vdd_l19_l20-supply: > +- vdd_l21-supply: > +- vdd_l22-supply: > +- vdd_l23_l24_l25-supply: > +- vdd_l2_l11_l12-supply: > +- vdd_l3_l4_l5-supply: > +- vdd_l6_l7-supply: > +- vdd_l8-supply: > +- vdd_l9-supply: > +- vdd_ncp-supply: > +- vdd_s0-supply: > +- vdd_s1-supply: > +- vdd_s2-supply: > +- vdd_s3-supply: > +- vdd_s4-supply: > + Usage: optional (pm8058 only) > + Value type: <phandle> > + Definition: reference to regulator supplying the input pin, as > + described in the data sheet > + > +- vdd_l0-supply: > +- vdd_l1-supply: > +- vdd_l2-supply: > +- vdd_l3-supply: > +- vdd_l4-supply: > +- vdd_l5-supply: > +- vdd_l6-supply: > +- vdd_s0-supply: > +- vdd_s1-supply: > +- vdd_s2-supply: > +- vdd_s3-supply: > +- vdd_s4-supply: > +- lvs0_in-supply: > +- lvs1_in-supply: > +- lvs2_in-supply: > +- lvs3_in-supply: > +- mvs_in-supply: > + Usage: optional (pm8901 only) > + Value type: <phandle> > + Definition: reference to regulator supplying the input pin, as > + described in the data sheet > + > +- vin_l1_l2_l12_l18-supply: > +- vin_l24-supply: > +- vin_l25-supply: > +- vin_l27-supply: > +- vin_l28-supply: > +- vin_lvs_1_3_6-supply: > +- vin_lvs2-supply: > +- vin_lvs_4_5_7-supply: > +- vin_ncp-supply: Can you also include vin_s1,vin_s2, etc. for the rest of the supplies I left out? It looks like you've covered all the inputs for the other pmics. > + Usage: optional (pm8921 only) > + Value type: <phandle> > + Definition: reference to regulator supplying the input pin, as > + described in the data sheet > + > +The regulator node houses sub-nodes for each regulator within the device. Each > +sub-node is identified using the node's name, with valid values listed for each > +of the pmics below. > + -- Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
