[PATCH v5 03/20] dt-bindings: thermal: tsens: add per-sensor cells for msm8974

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The msm8974 platform uses two sets of calibration data, add a special
case to handle both of them.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 .../bindings/thermal/qcom-tsens.yaml          | 58 +++++++++++++++++++
 1 file changed, 58 insertions(+)

diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index 4bb689f4602d..5543df93f752 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -91,6 +91,11 @@ properties:
         description: |
           Reference to nvmem cells for the calibration mode, two calibration
           bases and two cells per each sensor
+        # special case for msm8974 / apq8084
+      - maxItems: 51
+        description: |
+          Reference to nvmem cells for the calibration mode, two calibration
+          bases and two cells per each sensor, main and backup copies, plus use_backup cell
 
   nvmem-cell-names:
     oneOf:
@@ -138,6 +143,59 @@ properties:
             - s14_p2
             - s15_p1
             - s15_p2
+        # special case for msm8974 / apq8084
+      - items:
+          - const: mode
+          - const: base1
+          - const: base2
+          - const: s0_p1
+          - const: s0_p2
+          - const: s1_p1
+          - const: s1_p2
+          - const: s2_p1
+          - const: s2_p2
+          - const: s3_p1
+          - const: s3_p2
+          - const: s4_p1
+          - const: s4_p2
+          - const: s5_p1
+          - const: s5_p2
+          - const: s6_p1
+          - const: s6_p2
+          - const: s7_p1
+          - const: s7_p2
+          - const: s8_p1
+          - const: s8_p2
+          - const: s9_p1
+          - const: s9_p2
+          - const: s10_p1
+          - const: s10_p2
+          - const: use_backup
+          - const: mode_backup
+          - const: base1_backup
+          - const: base2_backup
+          - const: s0_p1_backup
+          - const: s0_p2_backup
+          - const: s1_p1_backup
+          - const: s1_p2_backup
+          - const: s2_p1_backup
+          - const: s2_p2_backup
+          - const: s3_p1_backup
+          - const: s3_p2_backup
+          - const: s4_p1_backup
+          - const: s4_p2_backup
+          - const: s5_p1_backup
+          - const: s5_p2_backup
+          - const: s6_p1_backup
+          - const: s6_p2_backup
+          - const: s7_p1_backup
+          - const: s7_p2_backup
+          - const: s8_p1_backup
+          - const: s8_p2_backup
+          - const: s9_p1_backup
+          - const: s9_p2_backup
+          - const: s10_p1_backup
+          - const: s10_p2_backup
 
   "#qcom,sensors":
     description:
-- 
2.39.0




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux