The Qcom PCIe controller is capable of using either internal MSI controller or the external GIC-ITS for receiving the MSIs from endpoint devices. Currently, the binding only documents the internal MSI implementation. Let's document the GIC-ITS imeplementation by making use of msi-map and msi-map-mask properties. Only one of the implementation should be used at a time. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx> --- Documentation/devicetree/bindings/pci/qcom,pcie.yaml | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml index 02450fb26bb9..10fec6a7abfc 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml @@ -104,14 +104,20 @@ required: - compatible - reg - reg-names - - interrupts - - interrupt-names - - "#interrupt-cells" - interrupt-map-mask - interrupt-map - clocks - clock-names +oneOf: + - required: + - interrupts + - interrupt-names + - "#interrupt-cells" + - required: + - msi-map + - msi-map-mask + allOf: - $ref: /schemas/pci/pci-bus.yaml# - if: -- 2.25.1
