Both PCIe0 and PCIe1 controllers are capable of receiving MSIs from
endpoint devices using GIC-ITS MSI controller. Add support for it.
Currently, BDF (0:0.0) and BDF (1:0.0) are enabled and with the
msi-map-mask of 0xff00, all the 32 devices under these two busses can
share the same Device ID.
The GIC-ITS MSI implementation provides an advantage over internal MSI
implementation using Locality-specific Peripheral Interrupts (LPI) that
would allow MSIs to be targeted for each CPU core.
It should be noted that the MSIs for BDF (1:0.0) only works with Device
ID of 0x5980 and 0x5a00. Hence, the IDs are swapped.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8450.dtsi | 20 ++++++++++++++------
1 file changed, 14 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 570475040d95..c4dd5838fac6 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -1733,9 +1733,13 @@ pcie0: pci@1c00000 {
ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>,
<0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>;
- interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "msi";
- #interrupt-cells = <1>;
+ /*
+ * MSIs for BDF (1:0.0) only works with Device ID 0x5980.
+ * Hence, the IDs are swapped.
+ */
+ msi-map = <0x0 &gic_its 0x5981 0x1>,
+ <0x100 &gic_its 0x5980 0x1>;
+ msi-map-mask = <0xff00>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
<0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
@@ -1842,9 +1846,13 @@ pcie1: pci@1c08000 {
ranges = <0x01000000 0x0 0x40200000 0 0x40200000 0x0 0x100000>,
<0x02000000 0x0 0x40300000 0 0x40300000 0x0 0x1fd00000>;
- interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "msi";
- #interrupt-cells = <1>;
+ /*
+ * MSIs for BDF (1:0.0) only works with Device ID 0x5a00.
+ * Hence, the IDs are swapped.
+ */
+ msi-map = <0x0 &gic_its 0x5a01 0x1>,
+ <0x100 &gic_its 0x5a00 0x1>;
+ msi-map-mask = <0xff00>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
<0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
--
2.25.1
