On 21/12/2022 14:18, Srinivasa Rao Mandadapu wrote: > > On 12/21/2022 4:09 PM, Krzysztof Kozlowski wrote: > Thanks for your time Krzysztof!!! >> On 21/12/2022 11:21, Srinivasa Rao Mandadapu wrote: >>> The clock gating control for TX/RX/WSA core bus clocks would be required >>> to be reset(moved from hardware control) from audio core driver. Thus >>> add the support for the reset clocks in audioreach based clock driver. >>> >>> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx> >>> --- >>> drivers/clk/qcom/lpasscc-sc7280.c | 18 ++++++++++++++++++ >>> 1 file changed, 18 insertions(+) >>> >>> diff --git a/drivers/clk/qcom/lpasscc-sc7280.c b/drivers/clk/qcom/lpasscc-sc7280.c >>> index 5c1e17b..d81d81b 100644 >>> --- a/drivers/clk/qcom/lpasscc-sc7280.c >>> +++ b/drivers/clk/qcom/lpasscc-sc7280.c >>> @@ -12,10 +12,12 @@ >>> #include <linux/regmap.h> >>> >>> #include <dt-bindings/clock/qcom,lpass-sc7280.h> >>> +#include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h> >> These are bindings for different device. > > They are not exactly for different device. It's for same device with > ADSP enabled platforms. > > Basically lpassaudiocc-sc7280.c and lpasscorecc-sc7280.c are for legacy > path. > > lpasscc-sc7280.c is for ADSP based AudioReach Solution. I see two different devices: lpasscc@3000000 clock-controller@3300000 clock inputs and outputs are different, so it does not look like for same device. Best regards, Krzysztof
