Hi Stephan, Sorry for delayed answer. On Thu, 2015-02-19 at 16:49 -0800, Stephen Boyd wrote: > On 02/03/15 04:17, Ivan T. Ivanov wrote: > > Following set of patches add initial DT support for PMIC devices > > found on recent Quqalcomm chipsets. Details for SPMI bus and PMIC arbiter > > could be found here [1]. > > Can you please put the specific compatible strings for the pmic model > into the nodes in addition to the generic "qcom,spmi-pmic"? We may want > to have regmap config tables in the future that describe the > cache/read/write abilities of the regsiters. If all we have is the > generic binding then we don't have a way to populate these tables. > Unless the plan there is to use the revid registers? > I would really like that we can use "revid" registers, but I don't know... >From what I can see usually in one physical PMIC chip they are 2 USID devices. I can successfully discover following USID's on APQ8074 boards: pmic-spmi 0-00: qcom,pm8941-v1.0 detected pmic-spmi 0-01: qcom,pm8941-v1.0 detected pmic-spmi 0-04: qcom,pm8841-v0.0 detected pmic-spmi 0-05: qcom,pm8841-v0.0 detected Unfortunately on PM8916 only one device is detected, with USID 0. But they should be two, judging by downstream DTS files, right? pmic-spmi 0-00: qcom,pm8916-v0.0 detected pmic-spmi 0-01: unknown device For communication with PM8916 I am using recent patches from Gilad [1]. Maybe there are still some issues with these patches, which can cause this behavior or PM8916 just didn't have these registers for USID 1? Regards, Ivan [1] https://lkml.org/lkml/2015/2/19/453 -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
