Rx operation on SPI GSI DMA is currently not working.
As per GSI spec, link_rx bit is to be set on GO TRE on tx
channel whenever there is going to be a DMA TRE on rx
channel. This is currently set for duplex operation only.
Set the bit for rx operation as well.
This is part of changes required to bring up Rx.
Fixes: 94b8f0e58fa1 ("dmaengine: qcom: gpi: set chain and link flag for duplex")
Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@xxxxxxxxxxx>
---
v1 -> v2:
- updated change description
---
drivers/dma/qcom/gpi.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/dma/qcom/gpi.c b/drivers/dma/qcom/gpi.c
index 061add8..59a36cb 100644
--- a/drivers/dma/qcom/gpi.c
+++ b/drivers/dma/qcom/gpi.c
@@ -1756,6 +1756,7 @@ static int gpi_create_spi_tre(struct gchan *chan, struct gpi_desc *desc,
tre->dword[3] = u32_encode_bits(TRE_TYPE_GO, TRE_FLAGS_TYPE);
if (spi->cmd == SPI_RX) {
tre->dword[3] |= u32_encode_bits(1, TRE_FLAGS_IEOB);
+ tre->dword[3] |= u32_encode_bits(1, TRE_FLAGS_LINK);
} else if (spi->cmd == SPI_TX) {
tre->dword[3] |= u32_encode_bits(1, TRE_FLAGS_CHAIN);
} else { /* SPI_DUPLEX */
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, hosted by the Linux Foundation.
