[PATCH 11/12] ARM: dts: Move i2c1 pinctrl to apq8064.dtsi

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I2C1 pinctrl is not really specific to a board, moving to SOC dtsi would
avoid redefining this in every board.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
---
 arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 7 -------
 arch/arm/boot/dts/qcom-apq8064.dtsi        | 7 +++++++
 2 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index 7a6a076..ab7aee2 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -11,13 +11,6 @@
 
 	soc {
 		pinctrl@800000 {
-			i2c1_pins: i2c1 {
-				mux {
-					pins = "gpio20", "gpio21";
-					function = "gsbi1";
-				};
-			};
-
 			card_detect: card_detect {
 				mux {
 					pins = "gpio26";
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index ba44f30..09077a0 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -115,6 +115,13 @@
 					function = "ps_hold";
 				};
 			};
+
+			i2c1_pins: i2c1 {
+				mux {
+					pins = "gpio20", "gpio21";
+					function = "gsbi1";
+				};
+			};
 		};
 
 		intc: interrupt-controller@2000000 {
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux