Re: [PATCH] drm/msm/dsi: Fix byte clock interface rate for 14nm PHY

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 19.01.2022 10:54, Loic Poulain wrote:
> According to downstream driver, byte intf clk rate should be half the
> byte clk only with DSI PHY verion above 2.0 (14nm):
> https://source.codeaurora.org/quic/la/platform/vendor/opensource/display-drivers/tree/msm/dsi/dsi_display.c?h=LA.UM.8.12.3.1#n3991
> 
> This change introduces a no_byte_intf_clk_div phy property, used to
> control byte clk intf divider.
> 
> This fixes DSI sync issues on 14nm based DSI Phy platorms.
> 
> Tested with:
>     - QCM2290 (14nm phy) + tc358767 DSI/DPI bridge
>     - QCM2290 (14nm phy) + lontium lt9611uxc DSI/HDMI bridge
> 
> Signed-off-by: Loic Poulain <loic.poulain@xxxxxxxxxx>
> ---
Required for the DSI display to function on SM6115 Lenovo Tab P11

Tested-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

Konrad
>  drivers/gpu/drm/msm/dsi/dsi_host.c         | 5 ++++-
>  drivers/gpu/drm/msm/dsi/phy/dsi_phy.h      | 1 +
>  drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c | 3 +++
>  3 files changed, 8 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
> index 428641e..1f8287a 100644
> --- a/drivers/gpu/drm/msm/dsi/dsi_host.c
> +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
> @@ -172,6 +172,8 @@ struct msm_dsi_host {
>  	/* from phy DT */
>  	bool cphy_mode;
>  
> +	bool phy_no_byte_intf_clk_div;
> +
>  	u32 dma_cmd_ctrl_restore;
>  
>  	bool registered;
> @@ -484,7 +486,7 @@ int dsi_link_clk_set_rate_6g(struct msm_dsi_host *msm_host)
>  
>  	if (msm_host->byte_intf_clk) {
>  		/* For CPHY, byte_intf_clk is same as byte_clk */
> -		if (msm_host->cphy_mode)
> +		if (msm_host->cphy_mode || msm_host->phy_no_byte_intf_clk_div)
>  			byte_intf_rate = msm_host->byte_clk_rate;
>  		else
>  			byte_intf_rate = msm_host->byte_clk_rate / 2;
> @@ -2196,6 +2198,7 @@ int msm_dsi_host_set_src_pll(struct mipi_dsi_host *host,
>  	int ret;
>  
>  	msm_host->cphy_mode = src_phy->cphy_mode;
> +	msm_host->phy_no_byte_intf_clk_div = src_phy->no_byte_intf_clk_div;
>  
>  	ret = msm_dsi_phy_get_clk_provider(src_phy,
>  				&byte_clk_provider, &pixel_clk_provider);
> diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
> index 4c82575..06d2284 100644
> --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
> +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
> @@ -103,6 +103,7 @@ struct msm_dsi_phy {
>  	enum msm_dsi_phy_usecase usecase;
>  	bool regulator_ldo_mode;
>  	bool cphy_mode;
> +	bool no_byte_intf_clk_div;
>  
>  	struct clk_hw *vco_hw;
>  	bool pll_on;
> diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
> index 7414966..f4849e6 100644
> --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
> +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
> @@ -897,6 +897,9 @@ static int dsi_pll_14nm_init(struct msm_dsi_phy *phy)
>  
>  	phy->vco_hw = &pll_14nm->clk_hw;
>  
> +	/* For PHY version <= 2.0 (14nm), byte_intf_clk = byte_clk */
> +	phy->no_byte_intf_clk_div = true;
> +
>  	return 0;
>  }
>  
> 



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux