Hi Josh,
Thank you for the review.
On Wed, 18 Feb 2015 09:34:46 -0600
Josh Cartwright <joshc@xxxxxxxxxxxx> wrote:
> Hey Gilad-
>
> On Mon, Feb 09, 2015 at 03:51:12PM -0700, Gilad Avidov wrote:
> > Qualcomm PMIC Arbiter version-2 changes from version-1 are:
> >
> > - Some different register offsets.
> > - New channel register space, one per PMIC peripheral (ppid).
> > All tx traffic uses these channels.
> > - New observer register space. All rx trafic uses this space.
> > - Different command format for spmi command registers.
> >
> > Acked-by: Sagar Dharia <sdharia@xxxxxxxxxxxxxx>
> > Signed-off-by: Gilad Avidov <gavidov@xxxxxxxxxxxxxx>
> [..]
> > +++ b/drivers/spmi/spmi-pmic-arb.c
> [..]
> > @@ -645,12 +795,65 @@ static int spmi_pmic_arb_probe(struct
> > platform_device *pdev) pa->spmic = ctrl;
> >
> > res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> > "core");
> > - pa->base = devm_ioremap_resource(&ctrl->dev, res);
> > - if (IS_ERR(pa->base)) {
> > - err = PTR_ERR(pa->base);
> > + pa->rd_base = devm_ioremap_resource(&ctrl->dev, res);
>
> This seems like an awkward way to do this, especially if you end up
> remapping it...
Agree. I think the following will fix it:
1. Assign the core reg base to a local variable.
2. For v1: assign that local to rd/wr base.
3. For v2: devm_unmap() that core.
>
> > + if (IS_ERR(pa->rd_base)) {
> > + err = PTR_ERR(pa->rd_base);
> > goto err_put_ctrl;
> > }
> >
> > + hw_ver = readl_relaxed(pa->rd_base + PMIC_ARB_VERSION);
> > + is_v1 = (hw_ver < PMIC_ARB_VERSION_V2_MIN);
> > +
> > + dev_info(&ctrl->dev, "PMIC Arb Version-%d (0x%x)\n",
> > (is_v1 ? 1 : 2),
> > + hw_ver);
> > +
> > + if (is_v1) {
> > + pa->ver_ops = &pmic_arb_v1;
> > + pa->wr_base = pa->rd_base;
> > + } else {
> > + u8 chan;
> > + u16 ppid;
> > + u32 regval;
> > +
> > + pa->ver_ops = &pmic_arb_v2;
> > +
> > + pa->ppid_to_chan = devm_kzalloc(&ctrl->dev,
> > + PPID_TO_CHAN_TABLE_SZ,
> > GFP_KERNEL);
> > + if (!pa->ppid_to_chan) {
> > + err = -ENOMEM;
> > + goto err_put_ctrl;
> > + }
> > + /*
> > + * PMIC_ARB_REG_CHNL is a table in HW mapping
> > channel to ppid.
> > + * ppid_to_chan is an in-memory invert of that
> > table.
> > + */
> > + for (chan = 0; chan < PMIC_ARB_MAX_CHNL; ++chan) {
> > + regval = readl_relaxed(pa->rd_base +
> > +
> > PMIC_ARB_REG_CHNL(chan));
> > + if (!regval)
> > + continue;
> > +
> > + ppid = (regval >> 8) & 0xFFF;
> > + pa->ppid_to_chan[ppid] = chan;
> > + }
> > +
> > + res = platform_get_resource_byname(pdev,
> > IORESOURCE_MEM,
> > + "obsrvr");
> > + pa->rd_base = devm_ioremap_resource(&ctrl->dev,
> > res);
>
> ...here. Especially because now you have some loose mapping hanging
> around for the lifetime of the device. I'd suggest splitting the v1
> and v2 probe routines out into their own functions.
>
75% of the probe code is common. By splitting to two probes that code
will be duplicated. Of course we can factor out the commonality, but
then will end up with a similar situation as here.
Splitting the probes will not rid us of needing the core reg space for
either version, since we need the core to access the version register.
> Josh
> --
> To unsubscribe from this list: send the line "unsubscribe
> linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
Thank you,
Gilad
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
