DT schema expects TLMM pin configuration nodes to be named with '-state' suffix and their optional children with '-pins' suffix. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> --- Cc: Doug Anderson <dianders@xxxxxxxxxxxx> Tested on Qualcomm RB3. Please kndly test a bit more on other devices. This should not have an functional impact. Changes since v2: 1. Bring back UART6 4-pin bias/drive strength to DTSI. Changes since v1: 1. Address comments and implement conclusion with Doug. Drop default-pins/pinmux/mux/config nodes but instead add subnodes for specific pins for UARTs. This should match approach used for SC7180. v1: https://lore.kernel.org/linux-kernel/1b9dcca8-1abd-99a3-da12-a8763bf77f12@xxxxxxxxxx/ --- arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi | 397 ++++------- arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 88 +-- .../arm64/boot/dts/qcom/sdm845-lg-common.dtsi | 60 +- arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts | 2 +- arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 77 +- .../boot/dts/qcom/sdm845-oneplus-common.dtsi | 101 ++- .../boot/dts/qcom/sdm845-shift-axolotl.dts | 150 ++-- .../dts/qcom/sdm845-sony-xperia-tama.dtsi | 6 +- .../qcom/sdm845-xiaomi-beryllium-common.dtsi | 12 +- .../boot/dts/qcom/sdm845-xiaomi-polaris.dts | 21 +- arch/arm64/boot/dts/qcom/sdm845.dtsi | 672 ++++++++---------- .../boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 53 +- .../boot/dts/qcom/sdm850-samsung-w737.dts | 121 +--- 13 files changed, 684 insertions(+), 1076 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi index ca676e04687b..246d9339728c 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi @@ -995,104 +995,69 @@ &wifi { /* PINCTRL - additions to nodes defined in sdm845.dtsi */ &qspi_cs0 { - pinconf { - pins = "gpio90"; - bias-disable; - }; + bias-disable; }; &qspi_clk { - pinconf { - pins = "gpio95"; - bias-disable; - }; + bias-disable; }; &qspi_data01 { - pinconf { - pins = "gpio91", "gpio92"; - - /* High-Z when no transfers; nice to park the lines */ - bias-pull-up; - }; + /* High-Z when no transfers; nice to park the lines */ + bias-pull-up; }; &qup_i2c3_default { - pinconf { - pins = "gpio41", "gpio42"; - drive-strength = <2>; + drive-strength = <2>; - /* Has external pullup */ - bias-disable; - }; + /* Has external pullup */ + bias-disable; }; &qup_i2c11_default { - pinconf { - pins = "gpio31", "gpio32"; - drive-strength = <2>; + drive-strength = <2>; - /* Has external pullup */ - bias-disable; - }; + /* Has external pullup */ + bias-disable; }; &qup_i2c12_default { - pinconf { - pins = "gpio49", "gpio50"; - drive-strength = <2>; + drive-strength = <2>; - /* Has external pullup */ - bias-disable; - }; + /* Has external pullup */ + bias-disable; }; &qup_i2c14_default { - pinconf { - pins = "gpio33", "gpio34"; - drive-strength = <2>; + drive-strength = <2>; - /* Has external pullup */ - bias-disable; - }; + /* Has external pullup */ + bias-disable; }; &qup_spi0_default { - pinconf { - pins = "gpio0", "gpio1", "gpio2", "gpio3"; - drive-strength = <2>; - bias-disable; - }; + drive-strength = <2>; + bias-disable; }; &qup_spi5_default { - pinconf { - pins = "gpio85", "gpio86", "gpio87", "gpio88"; - drive-strength = <2>; - bias-disable; - }; + drive-strength = <2>; + bias-disable; }; &qup_spi10_default { - pinconf { - pins = "gpio53", "gpio54", "gpio55", "gpio56"; - drive-strength = <2>; - bias-disable; - }; + drive-strength = <2>; + bias-disable; }; -&qup_uart9_default { - pinconf-tx { - pins = "gpio4"; - drive-strength = <2>; - bias-disable; - }; +&qup_uart9_rx { + drive-strength = <2>; + bias-pull-up; +}; - pinconf-rx { - pins = "gpio5"; - drive-strength = <2>; - bias-pull-up; - }; +&qup_uart9_tx { + drive-strength = <2>; + bias-disable; }; /* PINCTRL - board-specific pinctrl */ @@ -1180,243 +1145,153 @@ ap-suspend-l-hog { output-low; }; - ap_edp_bklten: ap-edp-bklten { - pinmux { - pins = "gpio37"; - function = "gpio"; - }; - - pinconf { - pins = "gpio37"; - drive-strength = <2>; - bias-disable; - }; + ap_edp_bklten: ap-edp-bklten-state { + pins = "gpio37"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; - bios_flash_wp_r_l: bios-flash-wp-r-l { - pinmux { - pins = "gpio128"; - function = "gpio"; - input-enable; - }; - - pinconf { - pins = "gpio128"; - bias-disable; - }; + bios_flash_wp_r_l: bios-flash-wp-r-l-state { + pins = "gpio128"; + function = "gpio"; + input-enable; + bias-disable; }; - ec_ap_int_l: ec-ap-int-l { - pinmux { - pins = "gpio122"; - function = "gpio"; - input-enable; - }; - - pinconf { - pins = "gpio122"; - bias-pull-up; - }; + ec_ap_int_l: ec-ap-int-l-state { + pins = "gpio122"; + function = "gpio"; + input-enable; + bias-pull-up; }; - edp_brij_en: edp-brij-en { - pinmux { - pins = "gpio102"; - function = "gpio"; - }; - - pinconf { - pins = "gpio102"; - drive-strength = <2>; - bias-disable; - }; + edp_brij_en: edp-brij-en-state { + pins = "gpio102"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; - edp_brij_irq: edp-brij-irq { - pinmux { - pins = "gpio10"; - function = "gpio"; - }; - - pinconf { - pins = "gpio10"; - drive-strength = <2>; - bias-pull-down; - }; + edp_brij_irq: edp-brij-irq-state { + pins = "gpio10"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; }; - en_pp3300_dx_edp: en-pp3300-dx-edp { - pinmux { - pins = "gpio43"; - function = "gpio"; - }; - - pinconf { - pins = "gpio43"; - drive-strength = <2>; - bias-disable; - }; + en_pp3300_dx_edp: en-pp3300-dx-edp-state { + pins = "gpio43"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; - h1_ap_int_odl: h1-ap-int-odl { - pinmux { - pins = "gpio129"; - function = "gpio"; - input-enable; - }; - - pinconf { - pins = "gpio129"; - bias-pull-up; - }; + h1_ap_int_odl: h1-ap-int-odl-state { + pins = "gpio129"; + function = "gpio"; + input-enable; + bias-pull-up; }; - pen_eject_odl: pen-eject-odl { - pinmux { - pins = "gpio119"; - function = "gpio"; - bias-pull-up; - }; + pen_eject_odl: pen-eject-odl-state { + pins = "gpio119"; + function = "gpio"; + bias-pull-up; }; - pen_irq_l: pen-irq-l { - pinmux { - pins = "gpio24"; - function = "gpio"; - }; + pen_irq_l: pen-irq-l-state { + pins = "gpio24"; + function = "gpio"; - pinconf { - pins = "gpio24"; - - /* Has external pullup */ - bias-disable; - }; + /* Has external pullup */ + bias-disable; }; - pen_pdct_l: pen-pdct-l { - pinmux { - pins = "gpio63"; - function = "gpio"; - }; - - pinconf { - pins = "gpio63"; + pen_pdct_l: pen-pdct-l-state { + pins = "gpio63"; + function = "gpio"; - /* Has external pullup */ - bias-disable; - }; + /* Has external pullup */ + bias-disable; }; - pen_rst_l: pen-rst-l { - pinmux { - pins = "gpio23"; - function = "gpio"; - }; - - pinconf { - pins = "gpio23"; - bias-disable; - drive-strength = <2>; + pen_rst_l: pen-rst-l-state { + pins = "gpio23"; + function = "gpio"; + bias-disable; + drive-strength = <2>; - /* - * The pen driver doesn't currently support - * driving this reset line. By specifying - * output-high here we're relying on the fact - * that this pin has a default pulldown at boot - * (which makes sure the pen was in reset if it - * was powered) and then we set it high here to - * take it out of reset. Better would be if the - * pen driver could control this and we could - * remove "output-high" here. - */ - output-high; - }; + /* + * The pen driver doesn't currently support + * driving this reset line. By specifying + * output-high here we're relying on the fact + * that this pin has a default pulldown at boot + * (which makes sure the pen was in reset if it + * was powered) and then we set it high here to + * take it out of reset. Better would be if the + * pen driver could control this and we could + * remove "output-high" here. + */ + output-high; }; - sdc2_clk: sdc2-clk { - pinconf { - pins = "sdc2_clk"; - bias-disable; + sdc2_clk: sdc2-clk-state { + pins = "sdc2_clk"; + bias-disable; - /* - * It seems that mmc_test reports errors if drive - * strength is not 16. - */ - drive-strength = <16>; - }; + /* + * It seems that mmc_test reports errors if drive + * strength is not 16. + */ + drive-strength = <16>; }; - sdc2_cmd: sdc2-cmd { - pinconf { - pins = "sdc2_cmd"; - bias-pull-up; - drive-strength = <16>; - }; + sdc2_cmd: sdc2-cmd-state { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <16>; }; - sdc2_data: sdc2-data { - pinconf { - pins = "sdc2_data"; - bias-pull-up; - drive-strength = <16>; - }; + sdc2_data: sdc2-data-state { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <16>; }; - sd_cd_odl: sd-cd-odl { - pinmux { - pins = "gpio44"; - function = "gpio"; - }; - - pinconf { - pins = "gpio44"; - bias-pull-up; - }; + sd_cd_odl: sd-cd-odl-state { + pins = "gpio44"; + function = "gpio"; + bias-pull-up; }; - ts_int_l: ts-int-l { - pinmux { - pins = "gpio125"; - function = "gpio"; - }; - - pinconf { - pins = "gpio125"; - bias-pull-up; - }; + ts_int_l: ts-int-l-state { + pins = "gpio125"; + function = "gpio"; + bias-pull-up; }; - ts_reset_l: ts-reset-l { - pinmux { - pins = "gpio118"; - function = "gpio"; - }; - - pinconf { - pins = "gpio118"; - bias-disable; - drive-strength = <2>; - }; + ts_reset_l: ts-reset-l-state { + pins = "gpio118"; + function = "gpio"; + bias-disable; + drive-strength = <2>; }; - ap_suspend_l_assert: ap_suspend_l_assert { - config { - pins = "gpio126"; - function = "gpio"; - bias-disable; - drive-strength = <2>; - output-low; - }; + ap_suspend_l_assert: ap-suspend-l-assert-state { + pins = "gpio126"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + output-low; }; - ap_suspend_l_deassert: ap_suspend_l_deassert { - config { - pins = "gpio126"; - function = "gpio"; - bias-disable; - drive-strength = <2>; - output-high; - }; + ap_suspend_l_deassert: ap-suspend-l-deassert-state { + pins = "gpio126"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + output-high; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index f324c0af665b..a90c6c6f5722 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -830,8 +830,8 @@ &spi2 { }; &tlmm { - cam0_default: cam0_default { - rst { + cam0_default: cam0-default-state { + rst-pins { pins = "gpio9"; function = "gpio"; @@ -839,7 +839,7 @@ rst { bias-disable; }; - mclk0 { + mclk0-pins { pins = "gpio13"; function = "cam_mclk"; @@ -848,8 +848,8 @@ mclk0 { }; }; - cam3_default: cam3_default { - rst { + cam3_default: cam3-default-state { + rst-pins { function = "gpio"; pins = "gpio21"; @@ -857,7 +857,7 @@ rst { bias-disable; }; - mclk3 { + mclk3-pins { function = "cam_mclk"; pins = "gpio16"; @@ -866,7 +866,7 @@ mclk3 { }; }; - dsi_sw_sel: dsi-sw-sel { + dsi_sw_sel: dsi-sw-sel-state { pins = "gpio120"; function = "gpio"; @@ -875,20 +875,20 @@ dsi_sw_sel: dsi-sw-sel { output-high; }; - lt9611_irq_pin: lt9611-irq { + lt9611_irq_pin: lt9611-irq-state { pins = "gpio84"; function = "gpio"; bias-disable; }; - pcie0_default_state: pcie0-default { - clkreq { + pcie0_default_state: pcie0-default-state { + clkreq-pins { pins = "gpio36"; function = "pci_e0"; bias-pull-up; }; - reset-n { + reset-n-pins { pins = "gpio35"; function = "gpio"; @@ -897,7 +897,7 @@ reset-n { bias-pull-down; }; - wake-n { + wake-n-pins { pins = "gpio37"; function = "gpio"; @@ -906,7 +906,7 @@ wake-n { }; }; - pcie0_pwren_state: pcie0-pwren { + pcie0_pwren_state: pcie0-pwren-state { pins = "gpio90"; function = "gpio"; @@ -914,8 +914,8 @@ pcie0_pwren_state: pcie0-pwren { bias-disable; }; - pcie1_default_state: pcie1-default { - perst-n { + pcie1_default_state: pcie1-default-state { + perst-n-pins { pins = "gpio102"; function = "gpio"; @@ -923,13 +923,13 @@ perst-n { bias-disable; }; - clkreq { + clkreq-pins { pins = "gpio103"; function = "pci_e1"; bias-pull-up; }; - wake-n { + wake-n-pins { pins = "gpio11"; function = "gpio"; @@ -937,7 +937,7 @@ wake-n { bias-pull-up; }; - reset-n { + reset-n-pins { pins = "gpio75"; function = "gpio"; @@ -947,8 +947,8 @@ reset-n { }; }; - sdc2_default_state: sdc2-default { - clk { + sdc2_default_state: sdc2-default-state { + clk-pins { pins = "sdc2_clk"; bias-disable; @@ -959,26 +959,26 @@ clk { drive-strength = <16>; }; - cmd { + cmd-pins { pins = "sdc2_cmd"; bias-pull-up; drive-strength = <10>; }; - data { + data-pins { pins = "sdc2_data"; bias-pull-up; drive-strength = <10>; }; }; - sdc2_card_det_n: sd-card-det-n { + sdc2_card_det_n: sd-card-det-n-state { pins = "gpio126"; function = "gpio"; bias-pull-up; }; - wcd_intr_default: wcd_intr_default { + wcd_intr_default: wcd-intr-default-state { pins = "gpio54"; function = "gpio"; @@ -1135,39 +1135,29 @@ &wifi { /* PINCTRL - additions to nodes defined in sdm845.dtsi */ &qup_spi2_default { - pinconf { - pins = "gpio27", "gpio28", "gpio29", "gpio30"; - drive-strength = <16>; - }; + drive-strength = <16>; }; &qup_uart3_default { - pinmux { - pins = "gpio41", "gpio42", "gpio43", "gpio44"; + cts-rts-pins { + pins = "gpio41", "gpio42"; function = "qup3"; }; }; &qup_i2c10_default { - pinconf { - pins = "gpio55", "gpio56"; - drive-strength = <2>; - bias-disable; - }; + drive-strength = <2>; + bias-disable; }; -&qup_uart9_default { - pinconf-tx { - pins = "gpio4"; - drive-strength = <2>; - bias-disable; - }; +&qup_uart9_rx { + drive-strength = <2>; + bias-pull-up; +}; - pinconf-rx { - pins = "gpio5"; - drive-strength = <2>; - bias-pull-up; - }; +&qup_uart9_tx { + drive-strength = <2>; + bias-disable; }; &pm8998_gpio { @@ -1277,8 +1267,6 @@ ov7251_ep: endpoint { /* PINCTRL - additions to nodes defined in sdm845.dtsi */ &qup_spi0_default { - config { - drive-strength = <6>; - bias-disable; - }; + drive-strength = <6>; + bias-disable; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi index 1eb423e4be24..3ccfbdb2880e 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi @@ -558,48 +558,36 @@ &usb_1_qmpphy { &tlmm { gpio-reserved-ranges = <28 4>, <81 4>; - sdc2_clk: sdc2-clk { - pinconf { - pins = "sdc2_clk"; - bias-disable; - - /* - * It seems that mmc_test reports errors if drive - * strength is not 16 on clk, cmd, and data pins. - * - * TODO: copy-pasted from mtp, try other values - * on these devices. - */ - drive-strength = <16>; - }; + sdc2_clk: sdc2-clk-state { + pins = "sdc2_clk"; + bias-disable; + + /* + * It seems that mmc_test reports errors if drive + * strength is not 16 on clk, cmd, and data pins. + * + * TODO: copy-pasted from mtp, try other values + * on these devices. + */ + drive-strength = <16>; }; - sdc2_cmd: sdc2-cmd { - pinconf { - pins = "sdc2_cmd"; - bias-pull-up; - drive-strength = <16>; - }; + sdc2_cmd: sdc2-cmd-state { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <16>; }; - sdc2_data: sdc2-data { - pinconf { - pins = "sdc2_data"; - bias-pull-up; - drive-strength = <16>; - }; + sdc2_data: sdc2-data-state { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <16>; }; - sd_card_det_n: sd-card-det-n { - pinmux { - pins = "gpio126"; - function = "gpio"; - }; - - pinconf { - pins = "gpio126"; - bias-pull-up; - }; + sd_card_det_n: sd-card-det-n-state { + pins = "gpio126"; + function = "gpio"; + bias-pull-up; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts b/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts index 7d967a104b3e..a12723310c8b 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts @@ -58,7 +58,7 @@ &mss_pil { }; &tlmm { - thinq_key_default: thinq-key-default { + thinq_key_default: thinq-key-default-state { pins = "gpio89"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts index de2d10e0315a..7c5478b71f8b 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts @@ -719,68 +719,49 @@ &wifi { /* PINCTRL - additions to nodes defined in sdm845.dtsi */ &qup_i2c10_default { - pinconf { - pins = "gpio55", "gpio56"; - drive-strength = <2>; - bias-disable; - }; + drive-strength = <2>; + bias-disable; }; -&qup_uart9_default { - pinconf-tx { - pins = "gpio4"; - drive-strength = <2>; - bias-disable; - }; +&qup_uart9_rx { + drive-strength = <2>; + bias-pull-up; +}; - pinconf-rx { - pins = "gpio5"; - drive-strength = <2>; - bias-pull-up; - }; +&qup_uart9_tx { + drive-strength = <2>; + bias-disable; }; &tlmm { gpio-reserved-ranges = <0 4>, <81 4>; - sdc2_clk: sdc2-clk { - pinconf { - pins = "sdc2_clk"; - bias-disable; + sdc2_clk: sdc2-clk-state { + pins = "sdc2_clk"; + bias-disable; - /* - * It seems that mmc_test reports errors if drive - * strength is not 16 on clk, cmd, and data pins. - */ - drive-strength = <16>; - }; + /* + * It seems that mmc_test reports errors if drive + * strength is not 16 on clk, cmd, and data pins. + */ + drive-strength = <16>; }; - sdc2_cmd: sdc2-cmd { - pinconf { - pins = "sdc2_cmd"; - bias-pull-up; - drive-strength = <16>; - }; + sdc2_cmd: sdc2-cmd-state { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <16>; }; - sdc2_data: sdc2-data { - pinconf { - pins = "sdc2_data"; - bias-pull-up; - drive-strength = <16>; - }; + sdc2_data: sdc2-data-state { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <16>; }; - sd_card_det_n: sd-card-det-n { - pinmux { - pins = "gpio126"; - function = "gpio"; - }; - - pinconf { - pins = "gpio126"; - bias-pull-up; - }; + sd_card_det_n: sd-card-det-n-state { + pins = "gpio126"; + function = "gpio"; + bias-pull-up; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi index 42cf4dd5ea28..738c9d0b322f 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi @@ -474,35 +474,24 @@ &qupv3_id_0 { status = "okay"; }; -&qup_i2c12_default { - mux { - pins = "gpio49", "gpio50"; - function = "qup12"; - drive-strength = <2>; - bias-disable; - }; +&qup_i2c10_default { + drive-strength = <2>; + bias-disable; }; -&qup_i2c10_default { - pinconf { - pins = "gpio55", "gpio56"; - drive-strength = <2>; - bias-disable; - }; +&qup_i2c12_default { + drive-strength = <2>; + bias-disable; }; -&qup_uart9_default { - pinconf-tx { - pins = "gpio4"; - drive-strength = <2>; - bias-disable; - }; +&qup_uart9_rx { + drive-strength = <2>; + bias-pull-up; +}; - pinconf-rx { - pins = "gpio5"; - drive-strength = <2>; - bias-pull-up; - }; +&qup_uart9_tx { + drive-strength = <2>; + bias-disable; }; &uart6 { @@ -588,51 +577,41 @@ &usb_1_hsphy { &tlmm { gpio-reserved-ranges = <0 4>, <81 4>; - tri_state_key_default: tri_state_key_default { - mux { - pins = "gpio40", "gpio42", "gpio26"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; + tri_state_key_default: tri-state-key-default-state { + pins = "gpio40", "gpio42", "gpio26"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; - ts_default_pins: ts-int { - mux { - pins = "gpio99", "gpio125"; - function = "gpio"; - drive-strength = <16>; - bias-pull-up; - }; + ts_default_pins: ts-int-state { + pins = "gpio99", "gpio125"; + function = "gpio"; + drive-strength = <16>; + bias-pull-up; }; - panel_reset_pins: panel-reset { - mux { - pins = "gpio6", "gpio25", "gpio26"; - function = "gpio"; - drive-strength = <8>; - bias-disable; - }; + panel_reset_pins: panel-reset-state { + pins = "gpio6", "gpio25", "gpio26"; + function = "gpio"; + drive-strength = <8>; + bias-disable; }; - panel_te_pin: panel-te { - mux { - pins = "gpio10"; - function = "mdp_vsync"; - drive-strength = <2>; - bias-disable; - input-enable; - }; + panel_te_pin: panel-te-state { + pins = "gpio10"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-disable; + input-enable; }; - panel_esd_pin: panel-esd { - mux { - pins = "gpio30"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - input-enable; - }; + panel_esd_pin: panel-esd-state { + pins = "gpio30"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + input-enable; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts index bb77ccfdc68c..563557eb1ada 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts @@ -559,18 +559,14 @@ led@5 { }; }; -&qup_uart9_default { - pinconf-rx { - pins = "gpio5"; - drive-strength = <2>; - bias-pull-up; - }; +&qup_uart9_rx { + drive-strength = <2>; + bias-pull-up; +}; - pinconf-tx { - pins = "gpio4"; - drive-strength = <2>; - bias-disable; - }; +&qup_uart9_tx { + drive-strength = <2>; + bias-disable; }; &qupv3_id_0 { @@ -584,110 +580,62 @@ &qupv3_id_1 { &tlmm { gpio-reserved-ranges = <0 4>, <81 4>; - sde_dsi_active: sde-dsi-active { - mux { - pins = "gpio6", "gpio11"; - function = "gpio"; - }; - - config { - pins = "gpio6", "gpio11"; - drive-strength = <8>; - bias-disable; - }; + sde_dsi_active: sde-dsi-active-state { + pins = "gpio6", "gpio11"; + function = "gpio"; + drive-strength = <8>; + bias-disable; }; - sde_dsi_suspend: sde-dsi-suspend { - mux { - pins = "gpio6", "gpio11"; - function = "gpio"; - }; - - config { - pins = "gpio6", "gpio11"; - drive-strength = <2>; - bias-pull-down; - }; + sde_dsi_suspend: sde-dsi-suspend-state { + pins = "gpio6", "gpio11"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; }; - sde_te_active: sde-te-active { - mux { - pins = "gpio10"; - function = "mdp_vsync"; - }; - - config { - pins = "gpio10"; - drive-strength = <2>; - bias-pull-down; - }; + sde_te_active: sde-te-active-state { + pins = "gpio10"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; }; - sde_te_suspend: sde-te-suspend { - mux { - pins = "gpio10"; - function = "mdp_vsync"; - }; - - config { - pins = "gpio10"; - drive-strength = <2>; - bias-pull-down; - }; + sde_te_suspend: sde-te-suspend-state { + pins = "gpio10"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; }; - ts_int_active: ts-int-active { - mux { - pins = "gpio125"; - function = "gpio"; - }; - - config { - pins = "gpio125"; - drive-strength = <8>; - bias-pull-up; - input-enable; - }; + ts_int_active: ts-int-active-state { + pins = "gpio125"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + input-enable; }; - ts_int_suspend: ts-int-suspend { - mux { - pins = "gpio125"; - function = "gpio"; - }; - - config { - pins = "gpio125"; - drive-strength = <2>; - bias-pull-down; - input-enable; - }; + ts_int_suspend: ts-int-suspend-state { + pins = "gpio125"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + input-enable; }; - ts_reset_active: ts-reset-active { - mux { - pins = "gpio99"; - function = "gpio"; - }; - - config { - pins = "gpio99"; - drive-strength = <8>; - bias-pull-up; - }; + ts_reset_active: ts-reset-active-state { + pins = "gpio99"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; }; - ts_reset_suspend: ts-reset-suspend { - mux { - pins = "gpio99"; - function = "gpio"; - }; - - config { - pins = "gpio99"; - drive-strength = <2>; - bias-pull-down; - }; + ts_reset_suspend: ts-reset-suspend-state { + pins = "gpio99"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi index 51ee42e3c995..3a920275dda3 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi @@ -383,19 +383,19 @@ &tlmm { gpio-reserved-ranges = <0 4>, <81 4>; sdc2_default_state: sdc2-default-state { - clk { + clk-pins { pins = "sdc2_clk"; drive-strength = <16>; bias-disable; }; - cmd { + cmd-pins { pins = "sdc2_cmd"; drive-strength = <10>; bias-pull-up; }; - data { + data-pins { pins = "sdc2_data"; drive-strength = <10>; bias-pull-up; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi index eb6b2b676eca..a21c52d3902f 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi @@ -445,33 +445,33 @@ codec { &tlmm { gpio-reserved-ranges = <0 4>, <81 4>; - sdc2_default_state: sdc2-default { - clk { + sdc2_default_state: sdc2-default-state { + clk-pins { pins = "sdc2_clk"; bias-disable; drive-strength = <16>; }; - cmd { + cmd-pins { pins = "sdc2_cmd"; bias-pull-up; drive-strength = <10>; }; - data { + data-pins { pins = "sdc2_data"; bias-pull-up; drive-strength = <10>; }; }; - sdc2_card_det_n: sd-card-det-n { + sdc2_card_det_n: sd-card-det-n-state { pins = "gpio126"; function = "gpio"; bias-pull-up; }; - wcd_intr_default: wcd_intr_default { + wcd_intr_default: wcd-intr-default-state { pins = <54>; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts index 38ba809a95cd..d0bc1661faeb 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts @@ -570,24 +570,21 @@ &qupv3_id_1 { }; &qup_i2c14_default { - pinconf { - pins = "gpio33", "gpio34"; - drive-strength = <2>; - bias-disable; - }; + drive-strength = <2>; + bias-disable; }; &tlmm { gpio-reserved-ranges = <0 4>, <81 4>; - ts_reset_default: ts-reset-default { + ts_reset_default: ts-reset-default-state { pins = "gpio99"; function = "gpio"; drive-strength = <16>; output-high; }; - ts_int_default: ts-int-default { + ts_int_default: ts-int-default-state { pins = "gpio125"; function = "gpio"; bias-pull-down; @@ -595,14 +592,14 @@ ts_int_default: ts-int-default { input-enable; }; - ts_reset_sleep: ts-reset-sleep { + ts_reset_sleep: ts-reset-sleep-state { pins = "gpio99"; function = "gpio"; bias-disable; drive-strength = <2>; }; - ts_int_sleep: ts-int-sleep { + ts_int_sleep: ts-int-sleep-state { pins = "gpio125"; function = "gpio"; bias-pull-down; @@ -610,21 +607,21 @@ ts_int_sleep: ts-int-sleep { input-enable; }; - sde_dsi_active: sde-dsi-active { + sde_dsi_active: sde-dsi-active-state { pins = "gpio6", "gpio10"; function = "gpio"; drive-strength = <8>; bias-disable; }; - sde_dsi_suspend: sde-dsi-suspend { + sde_dsi_suspend: sde-dsi-suspend-state { pins = "gpio6", "gpio10"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; - wcd_intr_default: wcd-intr-default { + wcd_intr_default: wcd-intr-default-state { pins = "gpio54"; function = "gpio"; input-enable; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 1a257f672887..e6019009533e 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -2641,7 +2641,7 @@ tlmm: pinctrl@3400000 { gpio-ranges = <&tlmm 0 0 151>; wakeup-parent = <&pdc_intc>; - cci0_default: cci0-default { + cci0_default: cci0-default-state { /* SDA, SCL */ pins = "gpio17", "gpio18"; function = "cci_i2c"; @@ -2650,7 +2650,7 @@ cci0_default: cci0-default { drive-strength = <2>; /* 2 mA */ }; - cci0_sleep: cci0-sleep { + cci0_sleep: cci0-sleep-state { /* SDA, SCL */ pins = "gpio17", "gpio18"; function = "cci_i2c"; @@ -2659,7 +2659,7 @@ cci0_sleep: cci0-sleep { bias-pull-down; }; - cci1_default: cci1-default { + cci1_default: cci1-default-state { /* SDA, SCL */ pins = "gpio19", "gpio20"; function = "cci_i2c"; @@ -2668,7 +2668,7 @@ cci1_default: cci1-default { drive-strength = <2>; /* 2 mA */ }; - cci1_sleep: cci1-sleep { + cci1_sleep: cci1-sleep-state { /* SDA, SCL */ pins = "gpio19", "gpio20"; function = "cci_i2c"; @@ -2677,556 +2677,480 @@ cci1_sleep: cci1-sleep { bias-pull-down; }; - qspi_clk: qspi-clk { - pinmux { - pins = "gpio95"; - function = "qspi_clk"; - }; + qspi_clk: qspi-clk-state { + pins = "gpio95"; + function = "qspi_clk"; }; - qspi_cs0: qspi-cs0 { - pinmux { - pins = "gpio90"; - function = "qspi_cs"; - }; + qspi_cs0: qspi-cs0-state { + pins = "gpio90"; + function = "qspi_cs"; }; - qspi_cs1: qspi-cs1 { - pinmux { - pins = "gpio89"; - function = "qspi_cs"; - }; + qspi_cs1: qspi-cs1-state { + pins = "gpio89"; + function = "qspi_cs"; }; - qspi_data01: qspi-data01 { - pinmux-data { - pins = "gpio91", "gpio92"; - function = "qspi_data"; - }; + qspi_data01: qspi-data01-state { + pins = "gpio91", "gpio92"; + function = "qspi_data"; }; - qspi_data12: qspi-data12 { - pinmux-data { - pins = "gpio93", "gpio94"; - function = "qspi_data"; - }; + qspi_data12: qspi-data12-state { + pins = "gpio93", "gpio94"; + function = "qspi_data"; }; - qup_i2c0_default: qup-i2c0-default { - pinmux { - pins = "gpio0", "gpio1"; - function = "qup0"; - }; + qup_i2c0_default: qup-i2c0-default-state { + pins = "gpio0", "gpio1"; + function = "qup0"; }; - qup_i2c1_default: qup-i2c1-default { - pinmux { - pins = "gpio17", "gpio18"; - function = "qup1"; - }; + qup_i2c1_default: qup-i2c1-default-state { + pins = "gpio17", "gpio18"; + function = "qup1"; }; - qup_i2c2_default: qup-i2c2-default { - pinmux { - pins = "gpio27", "gpio28"; - function = "qup2"; - }; + qup_i2c2_default: qup-i2c2-default-state { + pins = "gpio27", "gpio28"; + function = "qup2"; }; - qup_i2c3_default: qup-i2c3-default { - pinmux { - pins = "gpio41", "gpio42"; - function = "qup3"; - }; + qup_i2c3_default: qup-i2c3-default-state { + pins = "gpio41", "gpio42"; + function = "qup3"; }; - qup_i2c4_default: qup-i2c4-default { - pinmux { - pins = "gpio89", "gpio90"; - function = "qup4"; - }; + qup_i2c4_default: qup-i2c4-default-state { + pins = "gpio89", "gpio90"; + function = "qup4"; }; - qup_i2c5_default: qup-i2c5-default { - pinmux { - pins = "gpio85", "gpio86"; - function = "qup5"; - }; + qup_i2c5_default: qup-i2c5-default-state { + pins = "gpio85", "gpio86"; + function = "qup5"; }; - qup_i2c6_default: qup-i2c6-default { - pinmux { - pins = "gpio45", "gpio46"; - function = "qup6"; - }; + qup_i2c6_default: qup-i2c6-default-state { + pins = "gpio45", "gpio46"; + function = "qup6"; }; - qup_i2c7_default: qup-i2c7-default { - pinmux { - pins = "gpio93", "gpio94"; - function = "qup7"; - }; + qup_i2c7_default: qup-i2c7-default-state { + pins = "gpio93", "gpio94"; + function = "qup7"; }; - qup_i2c8_default: qup-i2c8-default { - pinmux { - pins = "gpio65", "gpio66"; - function = "qup8"; - }; + qup_i2c8_default: qup-i2c8-default-state { + pins = "gpio65", "gpio66"; + function = "qup8"; }; - qup_i2c9_default: qup-i2c9-default { - pinmux { - pins = "gpio6", "gpio7"; - function = "qup9"; - }; + qup_i2c9_default: qup-i2c9-default-state { + pins = "gpio6", "gpio7"; + function = "qup9"; }; - qup_i2c10_default: qup-i2c10-default { - pinmux { - pins = "gpio55", "gpio56"; - function = "qup10"; - }; + qup_i2c10_default: qup-i2c10-default-state { + pins = "gpio55", "gpio56"; + function = "qup10"; }; - qup_i2c11_default: qup-i2c11-default { - pinmux { - pins = "gpio31", "gpio32"; - function = "qup11"; - }; + qup_i2c11_default: qup-i2c11-default-state { + pins = "gpio31", "gpio32"; + function = "qup11"; }; - qup_i2c12_default: qup-i2c12-default { - pinmux { - pins = "gpio49", "gpio50"; - function = "qup12"; - }; + qup_i2c12_default: qup-i2c12-default-state { + pins = "gpio49", "gpio50"; + function = "qup12"; }; - qup_i2c13_default: qup-i2c13-default { - pinmux { - pins = "gpio105", "gpio106"; - function = "qup13"; - }; + qup_i2c13_default: qup-i2c13-default-state { + pins = "gpio105", "gpio106"; + function = "qup13"; }; - qup_i2c14_default: qup-i2c14-default { - pinmux { - pins = "gpio33", "gpio34"; - function = "qup14"; - }; + qup_i2c14_default: qup-i2c14-default-state { + pins = "gpio33", "gpio34"; + function = "qup14"; }; - qup_i2c15_default: qup-i2c15-default { - pinmux { - pins = "gpio81", "gpio82"; - function = "qup15"; - }; + qup_i2c15_default: qup-i2c15-default-state { + pins = "gpio81", "gpio82"; + function = "qup15"; }; - qup_spi0_default: qup-spi0-default { - pinmux { - pins = "gpio0", "gpio1", - "gpio2", "gpio3"; - function = "qup0"; - }; + qup_spi0_default: qup-spi0-default-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "qup0"; + drive-strength = <6>; + bias-disable; + }; - config { - pins = "gpio0", "gpio1", - "gpio2", "gpio3"; - drive-strength = <6>; - bias-disable; - }; + qup_spi1_default: qup-spi1-default-state { + pins = "gpio17", "gpio18", "gpio19", "gpio20"; + function = "qup1"; }; - qup_spi1_default: qup-spi1-default { - pinmux { - pins = "gpio17", "gpio18", - "gpio19", "gpio20"; - function = "qup1"; - }; + qup_spi2_default: qup-spi2-default-state { + pins = "gpio27", "gpio28", "gpio29", "gpio30"; + function = "qup2"; }; - qup_spi2_default: qup-spi2-default { - pinmux { - pins = "gpio27", "gpio28", - "gpio29", "gpio30"; - function = "qup2"; - }; + qup_spi3_default: qup-spi3-default-state { + pins = "gpio41", "gpio42", "gpio43", "gpio44"; + function = "qup3"; }; - qup_spi3_default: qup-spi3-default { - pinmux { - pins = "gpio41", "gpio42", - "gpio43", "gpio44"; - function = "qup3"; - }; + qup_spi4_default: qup-spi4-default-state { + pins = "gpio89", "gpio90", "gpio91", "gpio92"; + function = "qup4"; }; - qup_spi4_default: qup-spi4-default { - pinmux { - pins = "gpio89", "gpio90", - "gpio91", "gpio92"; - function = "qup4"; - }; + qup_spi5_default: qup-spi5-default-state { + pins = "gpio85", "gpio86", "gpio87", "gpio88"; + function = "qup5"; }; - qup_spi5_default: qup-spi5-default { - pinmux { - pins = "gpio85", "gpio86", - "gpio87", "gpio88"; - function = "qup5"; - }; + qup_spi6_default: qup-spi6-default-state { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + function = "qup6"; }; - qup_spi6_default: qup-spi6-default { - pinmux { - pins = "gpio45", "gpio46", - "gpio47", "gpio48"; - function = "qup6"; - }; + qup_spi7_default: qup-spi7-default-state { + pins = "gpio93", "gpio94", "gpio95", "gpio96"; + function = "qup7"; }; - qup_spi7_default: qup-spi7-default { - pinmux { - pins = "gpio93", "gpio94", - "gpio95", "gpio96"; - function = "qup7"; - }; + qup_spi8_default: qup-spi8-default-state { + pins = "gpio65", "gpio66", "gpio67", "gpio68"; + function = "qup8"; }; - qup_spi8_default: qup-spi8-default { - pinmux { - pins = "gpio65", "gpio66", - "gpio67", "gpio68"; - function = "qup8"; - }; + qup_spi9_default: qup-spi9-default-state { + pins = "gpio6", "gpio7", "gpio4", "gpio5"; + function = "qup9"; }; - qup_spi9_default: qup-spi9-default { - pinmux { - pins = "gpio6", "gpio7", - "gpio4", "gpio5"; - function = "qup9"; - }; + qup_spi10_default: qup-spi10-default-state { + pins = "gpio55", "gpio56", "gpio53", "gpio54"; + function = "qup10"; }; - qup_spi10_default: qup-spi10-default { - pinmux { - pins = "gpio55", "gpio56", - "gpio53", "gpio54"; - function = "qup10"; - }; + qup_spi11_default: qup-spi11-default-state { + pins = "gpio31", "gpio32", "gpio33", "gpio34"; + function = "qup11"; }; - qup_spi11_default: qup-spi11-default { - pinmux { - pins = "gpio31", "gpio32", - "gpio33", "gpio34"; - function = "qup11"; - }; + qup_spi12_default: qup-spi12-default-state { + pins = "gpio49", "gpio50", "gpio51", "gpio52"; + function = "qup12"; }; - qup_spi12_default: qup-spi12-default { - pinmux { - pins = "gpio49", "gpio50", - "gpio51", "gpio52"; - function = "qup12"; - }; + qup_spi13_default: qup-spi13-default-state { + pins = "gpio105", "gpio106", "gpio107", "gpio108"; + function = "qup13"; }; - qup_spi13_default: qup-spi13-default { - pinmux { - pins = "gpio105", "gpio106", - "gpio107", "gpio108"; - function = "qup13"; - }; + qup_spi14_default: qup-spi14-default-state { + pins = "gpio33", "gpio34", "gpio31", "gpio32"; + function = "qup14"; }; - qup_spi14_default: qup-spi14-default { - pinmux { - pins = "gpio33", "gpio34", - "gpio31", "gpio32"; - function = "qup14"; - }; + qup_spi15_default: qup-spi15-default-state { + pins = "gpio81", "gpio82", "gpio83", "gpio84"; + function = "qup15"; }; - qup_spi15_default: qup-spi15-default { - pinmux { - pins = "gpio81", "gpio82", - "gpio83", "gpio84"; - function = "qup15"; + qup_uart0_default: qup-uart0-default-state { + qup_uart0_tx: tx-pins { + pins = "gpio2"; + function = "qup0"; }; - }; - qup_uart0_default: qup-uart0-default { - pinmux { - pins = "gpio2", "gpio3"; + qup_uart0_rx: rx-pins { + pins = "gpio3"; function = "qup0"; }; }; - qup_uart1_default: qup-uart1-default { - pinmux { - pins = "gpio19", "gpio20"; + qup_uart1_default: qup-uart1-default-state { + qup_uart1_tx: tx-pins { + pins = "gpio19"; + function = "qup1"; + }; + + qup_uart1_rx: rx-pins { + pins = "gpio20"; function = "qup1"; }; }; - qup_uart2_default: qup-uart2-default { - pinmux { - pins = "gpio29", "gpio30"; + qup_uart2_default: qup-uart2-default-state { + qup_uart2_tx: tx-pins { + pins = "gpio29"; + function = "qup2"; + }; + + qup_uart2_rx: rx-pins { + pins = "gpio30"; function = "qup2"; }; }; - qup_uart3_default: qup-uart3-default { - pinmux { - pins = "gpio43", "gpio44"; + qup_uart3_default: qup-uart3-default-state { + qup_uart3_tx: tx-pins { + pins = "gpio43"; + function = "qup3"; + }; + + qup_uart3_rx: rx-pins { + pins = "gpio44"; function = "qup3"; }; }; - qup_uart4_default: qup-uart4-default { - pinmux { - pins = "gpio91", "gpio92"; + qup_uart4_default: qup-uart4-default-state { + qup_uart4_tx: tx-pins { + pins = "gpio91"; + function = "qup4"; + }; + + qup_uart4_rx: rx-pins { + pins = "gpio92"; function = "qup4"; }; }; - qup_uart5_default: qup-uart5-default { - pinmux { - pins = "gpio87", "gpio88"; + qup_uart5_default: qup-uart5-default-state { + qup_uart5_tx: tx-pins { + pins = "gpio87"; + function = "qup5"; + }; + + qup_uart5_rx: rx-pins { + pins = "gpio88"; function = "qup5"; }; }; - qup_uart6_default: qup-uart6-default { - pinmux { - pins = "gpio47", "gpio48"; + qup_uart6_default: qup-uart6-default-state { + qup_uart6_tx: tx-pins { + pins = "gpio47"; + function = "qup6"; + }; + + qup_uart6_rx: rx-pins { + pins = "gpio48"; function = "qup6"; }; }; qup_uart6_4pin: qup-uart6-4pin-state { - - cts-pins { + qup_uart6_4pin_cts: cts-pins { pins = "gpio45"; function = "qup6"; bias-pull-down; }; - rts-tx-pins { + qup_uart6_4pin_rts_tx: rts-tx-pins { pins = "gpio46", "gpio47"; function = "qup6"; drive-strength = <2>; bias-disable; }; - rx-pins { + qup_uart6_4pin_rx: rx-pins { pins = "gpio48"; function = "qup6"; bias-pull-up; }; }; - qup_uart7_default: qup-uart7-default { - pinmux { - pins = "gpio95", "gpio96"; + qup_uart7_default: qup-uart7-default-state { + qup_uart7_tx: tx-pins { + pins = "gpio95"; function = "qup7"; }; - }; - - qup_uart8_default: qup-uart8-default { - pinmux { - pins = "gpio67", "gpio68"; - function = "qup8"; - }; - }; - qup_uart9_default: qup-uart9-default { - pinmux { - pins = "gpio4", "gpio5"; - function = "qup9"; + qup_uart7_rx: rx-pins { + pins = "gpio96"; + function = "qup7"; }; }; - qup_uart10_default: qup-uart10-default { - pinmux { - pins = "gpio53", "gpio54"; - function = "qup10"; + qup_uart8_default: qup-uart8-default-state { + qup_uart8_tx: tx-pins { + pins = "gpio67"; + function = "qup8"; }; - }; - qup_uart11_default: qup-uart11-default { - pinmux { - pins = "gpio33", "gpio34"; - function = "qup11"; + qup_uart8_rx: rx-pins { + pins = "gpio68"; + function = "qup8"; }; }; - qup_uart12_default: qup-uart12-default { - pinmux { - pins = "gpio51", "gpio52"; - function = "qup12"; + qup_uart9_default: qup-uart9-default-state { + qup_uart9_tx: tx-pins { + pins = "gpio4"; + function = "qup9"; }; - }; - qup_uart13_default: qup-uart13-default { - pinmux { - pins = "gpio107", "gpio108"; - function = "qup13"; + qup_uart9_rx: rx-pins { + pins = "gpio5"; + function = "qup9"; }; }; - qup_uart14_default: qup-uart14-default { - pinmux { - pins = "gpio31", "gpio32"; - function = "qup14"; + qup_uart10_default: qup-uart10-default-state { + qup_uart10_tx: tx-pins { + pins = "gpio53"; + function = "qup10"; }; - }; - qup_uart15_default: qup-uart15-default { - pinmux { - pins = "gpio83", "gpio84"; - function = "qup15"; + qup_uart10_rx: rx-pins { + pins = "gpio54"; + function = "qup10"; }; }; - quat_mi2s_sleep: quat_mi2s_sleep { - mux { - pins = "gpio58", "gpio59"; - function = "gpio"; + qup_uart11_default: qup-uart11-default-state { + qup_uart11_tx: tx-pins { + pins = "gpio33"; + function = "qup11"; }; - config { - pins = "gpio58", "gpio59"; - drive-strength = <2>; - bias-pull-down; - input-enable; + qup_uart11_rx: rx-pins { + pins = "gpio34"; + function = "qup11"; }; }; - quat_mi2s_active: quat_mi2s_active { - mux { - pins = "gpio58", "gpio59"; - function = "qua_mi2s"; + qup_uart12_default: qup-uart12-default-state { + qup_uart12_tx: tx-pins { + pins = "gpio51"; + function = "qup0"; }; - config { - pins = "gpio58", "gpio59"; - drive-strength = <8>; - bias-disable; - output-high; + qup_uart12_rx: rx-pins { + pins = "gpio52"; + function = "qup0"; }; }; - quat_mi2s_sd0_sleep: quat_mi2s_sd0_sleep { - mux { - pins = "gpio60"; - function = "gpio"; + qup_uart13_default: qup-uart13-default-state { + qup_uart13_tx: tx-pins { + pins = "gpio107"; + function = "qup13"; }; - config { - pins = "gpio60"; - drive-strength = <2>; - bias-pull-down; - input-enable; + qup_uart13_rx: rx-pins { + pins = "gpio108"; + function = "qup13"; }; }; - quat_mi2s_sd0_active: quat_mi2s_sd0_active { - mux { - pins = "gpio60"; - function = "qua_mi2s"; + qup_uart14_default: qup-uart14-default-state { + qup_uart14_tx: tx-pins { + pins = "gpio31"; + function = "qup14"; }; - config { - pins = "gpio60"; - drive-strength = <8>; - bias-disable; + qup_uart14_rx: rx-pins { + pins = "gpio32"; + function = "qup14"; }; }; - quat_mi2s_sd1_sleep: quat_mi2s_sd1_sleep { - mux { - pins = "gpio61"; - function = "gpio"; + qup_uart15_default: qup-uart15-default-state { + qup_uart15_tx: tx-pins { + pins = "gpio83"; + function = "qup15"; }; - config { - pins = "gpio61"; - drive-strength = <2>; - bias-pull-down; - input-enable; + qup_uart15_rx: rx-pins { + pins = "gpio84"; + function = "qup15"; }; }; - quat_mi2s_sd1_active: quat_mi2s_sd1_active { - mux { - pins = "gpio61"; - function = "qua_mi2s"; - }; + quat_mi2s_sleep: quat-mi2s-sleep-state { + pins = "gpio58", "gpio59"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; - config { - pins = "gpio61"; - drive-strength = <8>; - bias-disable; - }; + quat_mi2s_active: quat-mi2s-active-state { + pins = "gpio58", "gpio59"; + function = "qua_mi2s"; + drive-strength = <8>; + bias-disable; + output-high; }; - quat_mi2s_sd2_sleep: quat_mi2s_sd2_sleep { - mux { - pins = "gpio62"; - function = "gpio"; - }; + quat_mi2s_sd0_sleep: quat-mi2s-sd0-sleep-state { + pins = "gpio60"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; - config { - pins = "gpio62"; - drive-strength = <2>; - bias-pull-down; - input-enable; - }; + quat_mi2s_sd0_active: quat-mi2s-sd0-active-state { + pins = "gpio60"; + function = "qua_mi2s"; + drive-strength = <8>; + bias-disable; }; - quat_mi2s_sd2_active: quat_mi2s_sd2_active { - mux { - pins = "gpio62"; - function = "qua_mi2s"; - }; + quat_mi2s_sd1_sleep: quat-mi2s-sd1-sleep-state { + pins = "gpio61"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; - config { - pins = "gpio62"; - drive-strength = <8>; - bias-disable; - }; + quat_mi2s_sd1_active: quat-mi2s-sd1-active-state { + pins = "gpio61"; + function = "qua_mi2s"; + drive-strength = <8>; + bias-disable; }; - quat_mi2s_sd3_sleep: quat_mi2s_sd3_sleep { - mux { - pins = "gpio63"; - function = "gpio"; - }; + quat_mi2s_sd2_sleep: quat-mi2s-sd2-sleep-state { + pins = "gpio62"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; - config { - pins = "gpio63"; - drive-strength = <2>; - bias-pull-down; - input-enable; - }; + quat_mi2s_sd2_active: quat-mi2s-sd2-active-state { + pins = "gpio62"; + function = "qua_mi2s"; + drive-strength = <8>; + bias-disable; }; - quat_mi2s_sd3_active: quat_mi2s_sd3_active { - mux { - pins = "gpio63"; - function = "qua_mi2s"; - }; + quat_mi2s_sd3_sleep: quat-mi2s-sd3-sleep-state { + pins = "gpio63"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; - config { - pins = "gpio63"; - drive-strength = <8>; - bias-disable; - }; + quat_mi2s_sd3_active: quat-mi2s-sd3-active-state { + pins = "gpio63"; + function = "qua_mi2s"; + drive-strength = <8>; + bias-disable; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts index f32b7445f7c9..83e4a92430fb 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts @@ -479,41 +479,13 @@ &mss_pil { }; &qup_i2c10_default { - pinconf { - pins = "gpio55", "gpio56"; - drive-strength = <2>; - bias-disable; - }; + drive-strength = <2>; + bias-disable; }; &qup_i2c12_default { - pinmux { - drive-strength = <2>; - bias-disable; - }; -}; - -&qup_uart6_default { - pinmux { - pins = "gpio45", "gpio46", "gpio47", "gpio48"; - function = "qup6"; - }; - - cts { - pins = "gpio45"; - bias-pull-down; - }; - - rts-tx { - pins = "gpio46", "gpio47"; - drive-strength = <2>; - bias-disable; - }; - - rx { - pins = "gpio48"; - bias-pull-up; - }; + drive-strength = <2>; + bias-disable; }; &qupv3_id_0 { @@ -621,13 +593,14 @@ codec { &tlmm { gpio-reserved-ranges = <0 4>, <81 4>; - sn65dsi86_pin_active: sn65dsi86-enable { + sn65dsi86_pin_active: sn65dsi86-enable-state { pins = "gpio96"; + function = "gpio"; drive-strength = <2>; bias-disable; }; - i2c3_hid_active: i2c2-hid-active { + i2c3_hid_active: i2c2-hid-active-state { pins = "gpio37"; function = "gpio"; @@ -636,7 +609,7 @@ i2c3_hid_active: i2c2-hid-active { drive-strength = <2>; }; - i2c5_hid_active: i2c5-hid-active { + i2c5_hid_active: i2c5-hid-active-state { pins = "gpio125"; function = "gpio"; @@ -645,7 +618,7 @@ i2c5_hid_active: i2c5-hid-active { drive-strength = <2>; }; - i2c11_hid_active: i2c11-hid-active { + i2c11_hid_active: i2c11-hid-active-state { pins = "gpio92"; function = "gpio"; @@ -654,7 +627,7 @@ i2c11_hid_active: i2c11-hid-active { drive-strength = <2>; }; - wcd_intr_default: wcd_intr_default { + wcd_intr_default: wcd-intr-default-state { pins = "gpio54"; function = "gpio"; @@ -663,7 +636,7 @@ wcd_intr_default: wcd_intr_default { drive-strength = <2>; }; - lid_pin_active: lid-pin { + lid_pin_active: lid-pin-state { pins = "gpio124"; function = "gpio"; @@ -671,7 +644,7 @@ lid_pin_active: lid-pin { bias-disable; }; - mode_pin_active: mode-pin { + mode_pin_active: mode-pin-state { pins = "gpio95"; function = "gpio"; @@ -681,6 +654,8 @@ mode_pin_active: mode-pin { }; &uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart6_4pin>; status = "okay"; bluetooth { diff --git a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts index daca1e0ad62a..9215066146ff 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts @@ -399,49 +399,18 @@ &mss_pil { }; &qup_i2c10_default { - pinconf { - pins = "gpio55", "gpio56"; - drive-strength = <2>; - bias-disable; - }; + drive-strength = <2>; + bias-disable; }; &qup_i2c11_default { - pinconf { - pins = "gpio31", "gpio32"; - drive-strength = <2>; - bias-disable; - }; + drive-strength = <2>; + bias-disable; }; &qup_i2c12_default { - pinmux { - drive-strength = <2>; - bias-disable; - }; -}; - -&qup_uart6_default { - pinmux { - pins = "gpio45", "gpio46", "gpio47", "gpio48"; - function = "qup6"; - }; - - cts { - pins = "gpio45"; - bias-pull-down; - }; - - rts-tx { - pins = "gpio46", "gpio47"; - drive-strength = <2>; - bias-disable; - }; - - rx { - pins = "gpio48"; - bias-pull-up; - }; + drive-strength = <2>; + bias-disable; }; &qupv3_id_0 { @@ -549,59 +518,41 @@ codec { &tlmm { gpio-reserved-ranges = <0 6>, <85 4>; - pen_irq_l: pen-irq-l { - pinmux { - pins = "gpio119"; - function = "gpio"; - }; - - pinconf { - pins = "gpio119"; - bias-disable; - }; + pen_irq_l: pen-irq-l-state { + pins = "gpio119"; + function = "gpio"; + bias-disable; }; - pen_pdct_l: pen-pdct-l { - pinmux { - pins = "gpio124"; - function = "gpio"; - }; - - pinconf { - pins = "gpio124"; - bias-disable; - drive-strength = <2>; - output-high; - }; + pen_pdct_l: pen-pdct-l-state { + pins = "gpio124"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + output-high; }; - pen_rst_l: pen-rst-l { - pinmux { - pins = "gpio21"; - function = "gpio"; - }; - - pinconf { - pins = "gpio21"; - bias-disable; - drive-strength = <2>; - - /* - * The pen driver doesn't currently support - * driving this reset line. By specifying - * output-high here we're relying on the fact - * that this pin has a default pulldown at boot - * (which makes sure the pen was in reset if it - * was powered) and then we set it high here to - * take it out of reset. Better would be if the - * pen driver could control this and we could - * remove "output-high" here. - */ - output-high; - }; + pen_rst_l: pen-rst-l-state { + pins = "gpio21"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + + /* + * The pen driver doesn't currently support + * driving this reset line. By specifying + * output-high here we're relying on the fact + * that this pin has a default pulldown at boot + * (which makes sure the pen was in reset if it + * was powered) and then we set it high here to + * take it out of reset. Better would be if the + * pen driver could control this and we could + * remove "output-high" here. + */ + output-high; }; - wcd_intr_default: wcd_intr_default { + wcd_intr_default: wcd-intr-default-state { pins = "gpio54"; function = "gpio"; @@ -612,6 +563,8 @@ wcd_intr_default: wcd_intr_default { }; &uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart6_4pin>; status = "okay"; bluetooth { -- 2.34.1
