[PATCH v3 3/3] arm64: dts: qcom: sdm845: do not customize SPI0 pin drive/bias

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Each board should define pin drive/bias for used busses.  All boards
using SPI0 (db845c and cheza) already do it, so drop the bias/drive
strength from SoC DTSI.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>

---

Cc: Doug Anderson <dianders@xxxxxxxxxxxx>

Changes since v2:
1. New patch.
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index e6019009533e..1a7999843dd6 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -2785,8 +2785,6 @@ qup_i2c15_default: qup-i2c15-default-state {
 			qup_spi0_default: qup-spi0-default-state {
 				pins = "gpio0", "gpio1", "gpio2", "gpio3";
 				function = "qup0";
-				drive-strength = <6>;
-				bias-disable;
 			};
 
 			qup_spi1_default: qup-spi1-default-state {
-- 
2.34.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux