Re: [PATCH 2/2] drm/msm/hdmi: add hdmi hdcp support (V2)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jan 30, 2015 at 2:39 PM, Bjorn Andersson <bjorn@xxxxxxx> wrote:
> On Fri, Jan 30, 2015 at 1:51 PM, Bjorn Andersson <bjorn@xxxxxxx> wrote:
>> On Tue, Jan 13, 2015 at 12:43 PM, Jilai Wang <jilaiw@xxxxxxxxxxxxxx> wrote:
>>> Add HDMI HDCP support including HDCP PartI/II/III authentication.
>>> V1: Initial Change
>>> V2: Address Bjorn&Rob's comments
>>>     Refactor the authentication process to use single work instead
>>>     of multiple work for different authentication stages.
>>>
>> Looks cleaner and the SCM parts look good now.
>>
>> But the ddc communication still makes me wonder, see below.
>>
>
> Rob made me aware about the fact that the hdmi driver is both
> implementing a driver for the i2c controller and now for the hdcp
> client and hence doesn't have an i2c_client handle.
>
> So unless this is redesigned to be split in a separate i2c client
> driver we probably have to have the ddc functions like this.
>
> I'm fine with this as is for now.
>

After digging some more in the i2c stack I found others using
i2c_new_dummy() to create a "dummy" i2c client from and adaptor and an
address.
By introducing that we could make hdmi->i2c an actual i2c_client and
use the client api in here.

Regards,
Bjorn
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux