Re: [Patch V4 00/10] ASoC: QCOM: Add support for ipq806x SOC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Feb 05, 2015 at 12:53:36PM -0800, Kenneth Westfield wrote:

> This patch series adds support for I2S audio playback on the Qualcomm
> Technologies ipq806x SOC.

> The ipq806x SOC has audio-related hardware blocks in its low-power audio
> subsystem (or LPASS).  One of the relevant blocks in the LPASS is its low-power
> audio interface (or LPAIF).  This contains an MI2S port, which is what these
> drivers are configured to use.  The LPAIF also contains a DMA engine that is
> dedicated to moving audio samples into the transmit FIFO of the MI2S port.  In
> addition, there is also low-power memory (LPM) within the audio subsystem, which
> is used for buffering the audio samples.

This is implementing an AP centric audio system design where the AP
directly programs all the audio hardware.  Given that pretty much all
public Qualcomm systems use a DSP centric model where the AP interacts
only with a DSP which deals with DMA and the physical interfaces it
seems reasonable to suppose that this system also has a DSP which at
some future point people are likely to want to use.

I'd really like to see some discussion as to how this is all supposed to
be handled - how will these direct hardware access drivers and device
trees work when someone does want to use the DSP (without causing
problems), and how will we transition from one to the other.  This is
particularly pressing if there are use cases where people will want to
switch between the two modes at runtime.

What I'm trying to avoid here is being in a situation where we have
existing stable DT bindings which we have to support but which conflict
with the way that people want to use the systems.

Attachment: signature.asc
Description: Digital signature


[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux