[PATCH v3 04/15] arm64: dts: qcom: sc7280: align MPSS PAS node with bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The SC7180 MPSS/MSS remote processor can be brought to life using two
different bindings:
1. qcom,sc7280-mpss-pas - currently used in DTSI
2. qcom,sc7280-mss-pil

Move the properties related to qcom,sc7180-mss-pil (qcom,halt-regs,
qcom,ext-regs, qcom,qaccept-regs, resets and additional clocks) to
specific board using the PIL, to silence DT schema warnings.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>

---

Changes since v2:
1. New patch.
---
 .../boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi | 17 +++++++++++++++++
 arch/arm64/boot/dts/qcom/sc7280.dtsi            | 16 ++--------------
 2 files changed, 19 insertions(+), 14 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
index ad66e5e9db4e..bf522a64b172 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
@@ -22,11 +22,28 @@ mba_mem: memory@9c700000 {
 
 &remoteproc_mpss {
 	compatible = "qcom,sc7280-mss-pil";
+
+	clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+		 <&gcc GCC_MSS_OFFLINE_AXI_CLK>,
+		 <&gcc GCC_MSS_SNOC_AXI_CLK>,
+		 <&rpmhcc RPMH_PKA_CLK>,
+		 <&rpmhcc RPMH_CXO_CLK>;
+	clock-names = "iface", "offline", "snoc_axi", "pka", "xo";
+
 	iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>;
 	interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
 	memory-region = <&mba_mem>, <&mpss_mem>;
 	firmware-name = "qcom/sc7280-herobrine/modem/mba.mbn",
 			"qcom/sc7280-herobrine/modem/qdsp6sw.mbn";
+
+	resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
+		 <&pdc_reset PDC_MODEM_SYNC_RESET>;
+	reset-names = "mss_restart", "pdc_reset";
+
+	qcom,halt-regs = <&tcsr_1 0x3000 0x5000 0x8000 0x13000>;
+	qcom,ext-regs = <&tcsr_2 0x10000 0x10004 &tcsr_1 0x6004 0x6008>;
+	qcom,qaccept-regs = <&tcsr_1 0x3030 0x3040 0x3020>;
+
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 448879d3d5cd..da3775677640 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -2751,12 +2751,8 @@ remoteproc_mpss: remoteproc@4080000 {
 			interrupt-names = "wdog", "fatal", "ready", "handover",
 					  "stop-ack", "shutdown-ack";
 
-			clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
-				 <&gcc GCC_MSS_OFFLINE_AXI_CLK>,
-				 <&gcc GCC_MSS_SNOC_AXI_CLK>,
-				 <&rpmhcc RPMH_PKA_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "iface", "offline", "snoc_axi", "pka", "xo";
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
 
 			power-domains = <&rpmhpd SC7280_CX>,
 					<&rpmhpd SC7280_MSS>;
@@ -2769,14 +2765,6 @@ remoteproc_mpss: remoteproc@4080000 {
 			qcom,smem-states = <&modem_smp2p_out 0>;
 			qcom,smem-state-names = "stop";
 
-			resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
-				 <&pdc_reset PDC_MODEM_SYNC_RESET>;
-			reset-names = "mss_restart", "pdc_reset";
-
-			qcom,halt-regs = <&tcsr_1 0x3000 0x5000 0x8000 0x13000>;
-			qcom,ext-regs = <&tcsr_2 0x10000 0x10004 &tcsr_1 0x6004 0x6008>;
-			qcom,qaccept-regs = <&tcsr_1 0x3030 0x3040 0x3020>;
-
 			status = "disabled";
 
 			glink-edge {
-- 
2.34.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux