On Tue, Jan 20, 2015 at 11:17:56AM +0200, Stanimir Varbanov wrote: <snip> > + MSM_MUX_blsp1_spi, > + MSM_MUX_blsp2_spi, > + MSM_MUX_blsp3_spi, The above three need to be renamed to blsp_spiX_csX to denote which SPI and chip select they modify. > + MSM_MUX_blsp_i2c1, > + MSM_MUX_blsp_i2c2, > + MSM_MUX_blsp_i2c3, > + MSM_MUX_blsp_i2c4, > + MSM_MUX_blsp_i2c5, > + MSM_MUX_blsp_i2c6, > + MSM_MUX_blsp_spi1, > + MSM_MUX_blsp_spi2, > + MSM_MUX_blsp_spi3, > + MSM_MUX_blsp_spi4, > + MSM_MUX_blsp_spi5, > + MSM_MUX_blsp_spi6, <snip> > + MSM_MUX_uim1_clk, > + MSM_MUX_uim1_data, > + MSM_MUX_uim1_present, > + MSM_MUX_uim1_reset, > + MSM_MUX_uim2_clk, > + MSM_MUX_uim2_data, > + MSM_MUX_uim2_present, > + MSM_MUX_uim2_reset, > + MSM_MUX_uim3_clk, > + MSM_MUX_uim3_data, > + MSM_MUX_uim3_present, > + MSM_MUX_uim3_reset, Can the UIM be collapsed into uim1, uim2, uim3? > + MSM_MUX_uim_batt, > + MSM_MUX_wcss_bt, > + MSM_MUX_wcss_fm, > + MSM_MUX_wcss_wlan, > + MSM_MUX_wcss_wlan0, > + MSM_MUX_wcss_wlan1, > + MSM_MUX_wcss_wlan2, Can the wcss_wlan0/1/2 be collapsed down into wlan? > + MSM_MUX_webcam1_rst, > + MSM_MUX_NA, > +}; <snip> > + PINGROUP(9, blsp_spi3, qdss_tracedata_a, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(10, blsp_spi3, blsp_i2c3, qdss_tracedata_a, NA, NA, NA, NA, NA, > + NA), > + PINGROUP(11, blsp_spi3, blsp_i2c3, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(12, blsp_spi4, gcc_gp2_clk_b, NA, atest_combodac, NA, NA, NA, > + NA, NA), > + PINGROUP(13, blsp_spi4, gcc_gp3_clk_b, NA, atest_combodac, NA, NA, NA, > + NA, NA), > + PINGROUP(14, blsp_spi4, blsp_i2c4, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(15, blsp_spi4, blsp_i2c4, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(16, blsp_spi5, blsp1_spi, NA, atest_bbrx1, NA, NA, NA, NA, NA), The blsp1_spi is cs2. We usually denote these as separate from the blspX_spi. And we should probably call it blsp_spi1_cs2 > + PINGROUP(17, blsp_spi5, blsp2_spi, NA, atest_bbrx0, NA, NA, NA, NA, NA), The blsp2_spi is cs2. We usually denote these as separate from the blspX_spi. And we should probably call it blsp_spi2_cs2 > + PINGROUP(18, blsp_spi5, blsp_i2c5, NA, atest_gpsadc1, NA, NA, NA, NA, > + NA), > + PINGROUP(19, blsp_spi5, blsp_i2c5, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(20, blsp_spi6, NA, NA, NA, NA, NA, NA, qdss_cti_trig_in_a0, > + NA), > + PINGROUP(21, blsp_spi6, NA, NA, NA, NA, NA, NA, qdss_cti_trig_in_b0, > + NA), > + PINGROUP(22, blsp_spi6, blsp_i2c6, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(23, blsp_spi6, blsp_i2c6, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(24, mdp_vsync, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(25, mdp_vsync, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(26, cam_mclk, NA, NA, NA, NA, NA, qdss_tracedata_b, NA, NA), cam_mclk0? > + PINGROUP(27, cam_mclk, NA, NA, NA, NA, NA, NA, NA, qdss_tracedata_b), cam_mclk1? > + PINGROUP(28, pwr_modem_enabled_a, NA, NA, NA, NA, NA, qdss_tracedata_b, > + NA, atest_combodac), > + PINGROUP(29, cci_i2c, NA, NA, NA, NA, NA, qdss_tracedata_b, NA, > + atest_combodac), > + PINGROUP(30, cci_i2c, NA, NA, NA, NA, NA, NA, NA, qdss_tracedata_b), > + PINGROUP(31, cci_timer0, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(32, cci_timer1, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(33, cci_async, NA, NA, NA, NA, NA, NA, NA, qdss_tracedata_b), > + PINGROUP(34, pwr_nav_enabled_a, NA, NA, NA, NA, NA, NA, NA, > + qdss_tracedata_b), > + PINGROUP(35, pwr_crypto_enabled_a, NA, NA, NA, NA, NA, NA, NA, > + qdss_tracedata_b), > + PINGROUP(36, NA, NA, NA, NA, NA, NA, NA, qdss_tracedata_b, NA), > + PINGROUP(37, blsp3_spi, NA, NA, NA, NA, NA, qdss_tracedata_b, NA, NA), See above for chip selects..... blsp_spi3_cs2 > + PINGROUP(38, cci_timer2, adsp_ext, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(39, wcss_bt, qdss_tracedata_a, NA, atest_combodac, NA, NA, NA, > + NA, NA), > + PINGROUP(40, wcss_wlan2, qdss_tracedata_a, NA, atest_combodac, NA, NA, Use wlan_data instead? This is data pin 2 for wlan_data. or use wcss_wlan > + NA, NA, NA), > + PINGROUP(41, wcss_wlan1, qdss_tracedata_a, NA, atest_combodac, NA, NA, Use wlan_data instead? This is data pin 1 for wlan_data. or use wcss_wlan > + NA, NA, NA), > + PINGROUP(42, wcss_wlan0, qdss_tracedata_a, NA, atest_combodac, NA, NA, Use wlan_data instead? This is data pin 0 for wlan_data. or use wcss_wlan > + NA, NA, NA), > + PINGROUP(43, wcss_wlan, prng_rosc, qdss_tracedata_a, NA, atest_combodac, > + NA, NA, NA, NA), > + PINGROUP(44, wcss_wlan, NA, atest_combodac, NA, NA, NA, NA, NA, NA), > + PINGROUP(45, wcss_fm, ext_lpass, qdss_tracectl_a, NA, atest_combodac, <snip> > + PINGROUP(67, cdc_pdm0, ebi0_wrcdc, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(68, cdc_pdm0, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(69, blsp3_spi, qdss_tracedata_a, NA, atest_combodac, NA, NA, See above spi chip selects..... blsp_spi3_cs3 > + NA, NA, NA), > + PINGROUP(70, NA, NA, NA, NA, NA, NA, NA, NA, NA), <snip> > + PINGROUP(109, pbs2, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(110, blsp1_spi, pri_mi2s_ws, NA, qdss_tracedata_b, NA, NA, NA, See above spi chip selects..... blsp_spi1_cs1 > + NA, NA), > + PINGROUP(111, qdss_tracedata_b, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(112, sec_mi2s, NA, NA, NA, qdss_tracedata_a, NA, atest_tsens, > + NA, NA), > + PINGROUP(113, pri_mi2s, NA, pwr_modem_enabled_b, NA, NA, NA, NA, NA, > + qdss_tracedata_a), > + PINGROUP(114, pri_mi2s, pwr_nav_enabled_b, NA, NA, NA, NA, NA, > + qdss_tracedata_a, NA), > + PINGROUP(115, pri_mi2s, pwr_crypto_enabled_b, NA, NA, NA, NA, NA, > + qdss_tracedata_a, NA), > + PINGROUP(116, pri_mi2s, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(117, sec_mi2s, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(118, sec_mi2s, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(119, sec_mi2s, m_voc, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(120, blsp3_spi, ldo_update, NA, NA, NA, NA, NA, NA, NA), See above spi chip selects..... blsp_spi3_cs1 > + PINGROUP(121, sd_write, blsp2_spi, ldo_en, NA, NA, NA, NA, NA, NA), See above spi chip selects..... blsp_spi2_cs1 > + SDC_PINGROUP(sdc1_clk, 0x10a000, 13, 6), > + SDC_PINGROUP(sdc1_cmd, 0x10a000, 11, 3), > + SDC_PINGROUP(sdc1_data, 0x10a000, 9, 0), <snip> -- Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
