Hi Andy, On 01/28/2015 12:10 AM, Andy Gross wrote: > This patch adds automatic configuration for the ADM CRCI muxing required to > support DMA operations for GSBI clients. The GSBI mode and instance determine > the correct TCSR ADM CRCI MUX value that must be programmed so that the DMA > works properly. > > Signed-off-by: Andy Gross <agross@xxxxxxxxxxxxxx> > --- > .../devicetree/bindings/soc/qcom/qcom,gsbi.txt | 17 ++- > drivers/soc/qcom/Kconfig | 1 + > drivers/soc/qcom/qcom_gsbi.c | 148 +++++++++++++++++++- > 3 files changed, 158 insertions(+), 8 deletions(-) > <snip> > diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig > index 7bd2c94..32f20be 100644 > --- a/drivers/soc/qcom/Kconfig > +++ b/drivers/soc/qcom/Kconfig > @@ -4,6 +4,7 @@ > config QCOM_GSBI > tristate "QCOM General Serial Bus Interface" > depends on ARCH_QCOM > + select MFD_SYSCON Wrong indentation? In fact the original Kconfig entry has spaces instead of tabs, could you prepare a cleanup patch for this. > help > Say y here to enable GSBI support. The GSBI provides control > functions for connecting the underlying serial UART, SPI, and I2C <snip> -- regards, Stan -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
