Syscon fits very well to access qfprom. This also means drivers which needs to
access qfprom have to talk to syscon and get regmap, offset, size and then do
regmap reads. This will be kinda redone in every driver. Having a wrapper for
this would avoid lot of code duplications and also provide a higher level and
user friendly apis for qfprom. This patch attempt to provide such wrappers.
This wrappers are easy way to use syscon for qfprom purposes.
Advantages of this approch is:
- driver need not have hardcoded qfprom offsets or have soc specific
compatible strings to determine the offset.
- access multiple qfprom resources which is kinda tricky with standard
syscon.
- no code duplication.
- light weight, single call.
- not a platform device driver level binding.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
---
.../devicetree/bindings/soc/qcom/qfprom.txt | 29 +++++
drivers/soc/qcom/Kconfig | 7 ++
drivers/soc/qcom/Makefile | 1 +
drivers/soc/qcom/qfprom.c | 134 +++++++++++++++++++++
4 files changed, 171 insertions(+)
create mode 100644 Documentation/devicetree/bindings/soc/qcom/qfprom.txt
create mode 100644 drivers/soc/qcom/qfprom.c
diff --git a/Documentation/devicetree/bindings/soc/qcom/qfprom.txt b/Documentation/devicetree/bindings/soc/qcom/qfprom.txt
new file mode 100644
index 0000000..3ed7309
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qfprom.txt
@@ -0,0 +1,29 @@
+QCOM QFPROM
+
+QFPROM is basically some efuses where things like calibration data, speed bins,
+etc are stored. This data is accessed by various drivers like the cpufreq,
+thermal, etc.
+
+Required properties:
+- compatible: must contain "qcom,qfprom" followed by "syscon"
+- reg: Address range for QFPROM
+- stride : register address stride.
+ 1 for byte.
+ 2 for 2 bytes
+ 3 for 3 bytes
+ 4 for a word.
+
+
+Example:
+ qfprom: qfprom@00700000 {
+ compatible = "qcom,qfprom", "syscon";
+ reg = <0x00700000 0x1000>;
+ stride = <1>;
+ };
+
+ tsens@34000 {
+ compatible = "qcom,tsens-apq8064";
+ reg = <0x34000 0x1000>;
+ qcom,qfprom = <&qfprom 0x18 0x10>, <&qfprom 0x28 0x10>;
+ qcom,qfprom-names = "calib", "backup_calib";
+ };
diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index 012fb37..389ec3e 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -19,3 +19,10 @@ config QCOM_PM
QCOM Platform specific power driver to manage cores and L2 low power
modes. It interface with various system drivers to put the cores in
low power modes.
+
+config QCOM_QFPROM
+ tristate "QCOM QFPROM Interface"
+ depends on ARCH_QCOM && OF
+ help
+ Say y here to enable QFPROM support. The QFPROM provides access
+ functions for QFPROM data to rest of the drivers via syscon wrappers.
diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
index 20b329f..f5aff0a 100644
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -1,4 +1,5 @@
obj-$(CONFIG_QCOM_GSBI) += qcom_gsbi.o
obj-$(CONFIG_QCOM_PM) += spm.o
+obj-$(CONFIG_QCOM_QFPROM) += qfprom.o
CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
obj-$(CONFIG_QCOM_SCM) += scm.o scm-boot.o
diff --git a/drivers/soc/qcom/qfprom.c b/drivers/soc/qcom/qfprom.c
new file mode 100644
index 0000000..d00ed25
--- /dev/null
+++ b/drivers/soc/qcom/qfprom.c
@@ -0,0 +1,134 @@
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+#include <linux/soc/qcom/qfprom.h>
+#include <linux/slab.h>
+
+#define QFPROM_MAX_ARGS 2
+
+static char *__qfprom_get_data(struct device *dev,
+ bool devm, int idx, int *len)
+{
+ struct device_node *syscon_np, *np = dev->of_node;
+ struct regmap *rm;
+ struct of_phandle_args args;
+ int rc, stride = 4;
+ u32 offset, size;
+ char *data;
+
+ if (!np)
+ return ERR_PTR(-EINVAL);
+
+ rc = of_parse_phandle_with_fixed_args(np, "qcom,qfprom",
+ QFPROM_MAX_ARGS, idx, &args);
+ if (rc)
+ return ERR_PTR(rc);
+
+ syscon_np = args.np;
+
+ of_property_read_u32(syscon_np, "stride", &stride);
+
+ if (stride >= 4)
+ stride = 4;
+
+ if (args.args_count < QFPROM_MAX_ARGS) {
+ dev_err(dev, "Insufficient qfprom arguments %d\n",
+ args.args_count);
+ return ERR_PTR(-EINVAL);
+ }
+
+ rm = syscon_node_to_regmap(syscon_np);
+ if (IS_ERR(rm))
+ return ERR_CAST(rm);
+
+ offset = args.args[0];
+ size = args.args[1];
+
+ of_node_put(syscon_np);
+
+ if (devm)
+ data = devm_kzalloc(dev, size, GFP_KERNEL | GFP_ATOMIC);
+ else
+ data = kzalloc(size, GFP_KERNEL | GFP_ATOMIC);
+
+ if (!data)
+ return ERR_PTR(-ENOMEM);
+
+ rc = regmap_bulk_read(rm, offset, data, size/stride);
+ if (rc < 0) {
+ if (devm)
+ devm_kfree(dev, data);
+ else
+ kfree(data);
+
+ return ERR_PTR(rc);
+ }
+
+ *len = size;
+
+ return data;
+}
+
+static char *__qfprom_get_data_byname(struct device *dev,
+ bool devm, const char *name, int *len)
+{
+ int index = 0;
+
+ if (name)
+ index = of_property_match_string(dev->of_node,
+ "qcom,qfprom-names", name);
+
+ return __qfprom_get_data(dev, devm, index, len);
+}
+
+char *devm_qfprom_get_data_byname(struct device *dev,
+ const char *name, int *len)
+{
+ return __qfprom_get_data_byname(dev, true, name, len);
+}
+EXPORT_SYMBOL_GPL(devm_qfprom_get_data_byname);
+
+char *devm_qfprom_get_data(struct device *dev,
+ int index, int *len)
+{
+ return __qfprom_get_data(dev, true, index, len);
+}
+EXPORT_SYMBOL_GPL(devm_qfprom_get_data);
+
+/**
+ * qfprom_get_data_byname(): Reads qfprom data by name
+ *
+ * @dev: device which is requesting qfprom data
+ * @index: name of qfprom resources specified "qcom,qfprom-names" DT property.
+ * @len: length of data read from qfprom.
+ *
+ * The return value will be an ERR_PTR() on error or a valid pointer
+ * to a data buffer. The buffer should be freed by the user once its
+ * finished working with it kfree.
+ **/
+char *qfprom_get_data_byname(struct device *dev,
+ const char *name, int *len)
+{
+ return __qfprom_get_data_byname(dev, false, name, len);
+}
+EXPORT_SYMBOL_GPL(qfprom_get_data_byname);
+
+/**
+ * qfprom_get_data(): Reads qfprom data from the index
+ *
+ * @dev: device which is requesting qfprom data
+ * @index: index into qfprom resources specified "qcom,qfprom" DT property.
+ * @len: length of data read from qfprom.
+ *
+ * The return value will be an ERR_PTR() on error or a valid pointer
+ * to a data buffer. The buffer should be freed by the user once its
+ * finished working with it kfree.
+ **/
+char *qfprom_get_data(struct device *dev,
+ int index, int *len)
+{
+ return __qfprom_get_data(dev, false, index, len);
+}
+EXPORT_SYMBOL_GPL(qfprom_get_data);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
