Re: [PATCH 2/2] drm/msm/mdp5: Add hardware cursor support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jan 14, 2015 at 7:55 PM, Daniel Vetter <daniel@xxxxxxxx> wrote:
> On Tue, Jan 13, 2015 at 05:18:04PM -0500, Stephane Viau wrote:
>> From: Beeresh Gopal <gbeeresh@xxxxxxxxxxxxxx>
>>
>> This patch implements the hardware accelarated cursor
>> support for MDP5 platforms.
>>
>> Signed-off-by: Beeresh Gopal <gbeeresh@xxxxxxxxxxxxxx>
>> Signed-off-by: Wentao Xu <wentaox@xxxxxxxxxxxxxx>
>> Signed-off-by: Stephane Viau <sviau@xxxxxxxxxxxxxx>
>
> Imo implementing legacy cursor support instead of with universal planes
> makes no sense. Especially since msm is converted to atomic already, and
> you can't move the cursor with atomic when it's legacy only. See the
> cursor argument for the drm_crtc_init_with_planes function and how it's
> used in e.g. i915.
>

well, I'm still not 100% convinced about going through the whole
atomic mechanism for cursors..  in particular stuff that tries to
enable/disable the cursor at 1000fps, goes *really* badly when things
start waiting for vsync.

I'll probably try some experiments with it at some point, but at this
point something that works with x11 is a lot more interesting for me
(since every time I switch from mdp4 device to mdp5 device I forget to
disable hw cursor the first time I start x)

BR,
-R

> Cheers, Daniel
>
>> ---
>>  drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c | 164 +++++++++++++++++++++++++++++++
>>  1 file changed, 164 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c
>> index f021f96..2021f09 100644
>> --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c
>> +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c
>> @@ -24,6 +24,9 @@
>>  #include "drm_crtc_helper.h"
>>  #include "drm_flip_work.h"
>>
>> +#define CURSOR_WIDTH 64
>> +#define CURSOR_HEIGHT 64
>> +
>>  #define SSPP_MAX (SSPP_RGB3 + 1) /* TODO: Add SSPP_MAX in mdp5.xml.h */
>>
>>  struct mdp5_crtc {
>> @@ -47,8 +50,21 @@ struct mdp5_crtc {
>>  #define PENDING_FLIP   0x2
>>   atomic_t pending;
>>
>> + /* for unref'ing cursor bo's after scanout completes: */
>> + struct drm_flip_work unref_cursor_work;
>> +
>>   struct mdp_irq vblank;
>>   struct mdp_irq err;
>> +
>> + struct {
>> + /* protect REG_MDP5_LM_CURSOR* registers and cursor scanout_bo*/
>> + spinlock_t lock;
>> +
>> + /* current cursor being scanned out: */
>> + struct drm_gem_object *scanout_bo;
>> + uint32_t width;
>> + uint32_t height;
>> + } cursor;
>>  };
>>  #define to_mdp5_crtc(x) container_of(x, struct mdp5_crtc, base)
>>
>> @@ -129,11 +145,22 @@ static void complete_flip(struct drm_crtc *crtc, struct drm_file *file)
>>   }
>>  }
>>
>> +static void unref_cursor_worker(struct drm_flip_work *work, void *val)
>> +{
>> + struct mdp5_crtc *mdp5_crtc =
>> + container_of(work, struct mdp5_crtc, unref_cursor_work);
>> + struct mdp5_kms *mdp5_kms = get_kms(&mdp5_crtc->base);
>> +
>> + msm_gem_put_iova(val, mdp5_kms->id);
>> + drm_gem_object_unreference_unlocked(val);
>> +}
>> +
>>  static void mdp5_crtc_destroy(struct drm_crtc *crtc)
>>  {
>>   struct mdp5_crtc *mdp5_crtc = to_mdp5_crtc(crtc);
>>
>>   drm_crtc_cleanup(crtc);
>> + drm_flip_work_cleanup(&mdp5_crtc->unref_cursor_work);
>>
>>   kfree(mdp5_crtc);
>>  }
>> @@ -384,6 +411,132 @@ static int mdp5_crtc_set_property(struct drm_crtc *crtc,
>>   return -EINVAL;
>>  }
>>
>> +static int mdp5_crtc_cursor_set(struct drm_crtc *crtc,
>> + struct drm_file *file, uint32_t handle,
>> + uint32_t width, uint32_t height)
>> +{
>> + struct mdp5_crtc *mdp5_crtc = to_mdp5_crtc(crtc);
>> + struct drm_device *dev = crtc->dev;
>> + struct mdp5_kms *mdp5_kms = get_kms(crtc);
>> + struct drm_gem_object *cursor_bo, *old_bo;
>> + uint32_t blendcfg, cursor_addr, stride;
>> + int ret, bpp, lm;
>> + unsigned int depth;
>> + enum mdp5_cursor_alpha cur_alpha = CURSOR_ALPHA_PER_PIXEL;
>> + uint32_t flush_mask = mdp_ctl_flush_mask_cursor(0);
>> + unsigned long flags;
>> +
>> + if ((width > CURSOR_WIDTH) || (height > CURSOR_HEIGHT)) {
>> + dev_err(dev->dev, "bad cursor size: %dx%d\n", width, height);
>> + return -EINVAL;
>> + }
>> +
>> + if (NULL == mdp5_crtc->ctl)
>> + return -EINVAL;
>> +
>> + if (!handle) {
>> + DBG("Cursor off");
>> + return mdp5_ctl_set_cursor(mdp5_crtc->ctl, false);
>> + }
>> +
>> + cursor_bo = drm_gem_object_lookup(dev, file, handle);
>> + if (!cursor_bo)
>> + return -ENOENT;
>> +
>> + ret = msm_gem_get_iova(cursor_bo, mdp5_kms->id, &cursor_addr);
>> + if (ret)
>> + return -EINVAL;
>> +
>> + lm = mdp5_crtc->lm;
>> + drm_fb_get_bpp_depth(DRM_FORMAT_ARGB8888, &depth, &bpp);
>> + stride = width * (bpp >> 3);
>> +
>> + spin_lock_irqsave(&mdp5_crtc->cursor.lock, flags);
>> + old_bo = mdp5_crtc->cursor.scanout_bo;
>> +
>> + mdp5_write(mdp5_kms, REG_MDP5_LM_CURSOR_STRIDE(lm), stride);
>> + mdp5_write(mdp5_kms, REG_MDP5_LM_CURSOR_FORMAT(lm),
>> + MDP5_LM_CURSOR_FORMAT_FORMAT(CURSOR_FMT_ARGB8888));
>> + mdp5_write(mdp5_kms, REG_MDP5_LM_CURSOR_IMG_SIZE(lm),
>> + MDP5_LM_CURSOR_IMG_SIZE_SRC_H(height) |
>> + MDP5_LM_CURSOR_IMG_SIZE_SRC_W(width));
>> + mdp5_write(mdp5_kms, REG_MDP5_LM_CURSOR_SIZE(lm),
>> + MDP5_LM_CURSOR_SIZE_ROI_H(height) |
>> + MDP5_LM_CURSOR_SIZE_ROI_W(width));
>> + mdp5_write(mdp5_kms, REG_MDP5_LM_CURSOR_BASE_ADDR(lm), cursor_addr);
>> +
>> +
>> + blendcfg = MDP5_LM_CURSOR_BLEND_CONFIG_BLEND_EN;
>> + blendcfg |= MDP5_LM_CURSOR_BLEND_CONFIG_BLEND_TRANSP_EN;
>> + blendcfg |= MDP5_LM_CURSOR_BLEND_CONFIG_BLEND_ALPHA_SEL(cur_alpha);
>> + mdp5_write(mdp5_kms, REG_MDP5_LM_CURSOR_BLEND_CONFIG(lm), blendcfg);
>> +
>> + mdp5_crtc->cursor.scanout_bo = cursor_bo;
>> + mdp5_crtc->cursor.width = width;
>> + mdp5_crtc->cursor.height = height;
>> + spin_unlock_irqrestore(&mdp5_crtc->cursor.lock, flags);
>> +
>> + ret = mdp5_ctl_set_cursor(mdp5_crtc->ctl, true);
>> + if (ret)
>> + goto end;
>> +
>> + flush_mask |= mdp5_ctl_get_flush(mdp5_crtc->ctl);
>> + crtc_flush(crtc, flush_mask);
>> +
>> +end:
>> + if (old_bo) {
>> + drm_flip_work_queue(&mdp5_crtc->unref_cursor_work, old_bo);
>> + /* enable vblank to complete cursor work: */
>> + request_pending(crtc, PENDING_CURSOR);
>> + }
>> + return ret;
>> +}
>> +
>> +static int mdp5_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
>> +{
>> + struct mdp5_kms *mdp5_kms = get_kms(crtc);
>> + struct mdp5_crtc *mdp5_crtc = to_mdp5_crtc(crtc);
>> + uint32_t flush_mask = mdp_ctl_flush_mask_cursor(0);
>> + uint32_t xres = crtc->mode.hdisplay;
>> + uint32_t yres = crtc->mode.vdisplay;
>> + uint32_t roi_w;
>> + uint32_t roi_h;
>> + unsigned long flags;
>> +
>> + x = (x > 0) ? x : 0;
>> + y = (y > 0) ? y : 0;
>> +
>> + /*
>> + * Cursor Region Of Interest (ROI) is a plane read from cursor
>> + * buffer to render. The ROI region is determined by the visiblity of
>> + * the cursor point. In the default Cursor image the cursor point will
>> + * be at the top left of the cursor image, unless it is specified
>> + * otherwise using hotspot feature.
>> + *
>> + * If the cursor point reaches the right (xres - x < cursor.width) or
>> + * bottom (yres - y < cursor.height) boundary of the screen, then ROI
>> + * width and ROI height need to be evaluated to crop the cursor image
>> + * accordingly.
>> + * (xres-x) will be new cursor width when x > (xres - cursor.width)
>> + * (yres-y) will be new cursor height when y > (yres - cursor.height)
>> + */
>> + roi_w = min(mdp5_crtc->cursor.width, xres - x);
>> + roi_h = min(mdp5_crtc->cursor.height, yres - y);
>> +
>> + spin_lock_irqsave(&mdp5_crtc->cursor.lock, flags);
>> + mdp5_write(mdp5_kms, REG_MDP5_LM_CURSOR_SIZE(mdp5_crtc->lm),
>> + MDP5_LM_CURSOR_SIZE_ROI_H(roi_h) |
>> + MDP5_LM_CURSOR_SIZE_ROI_W(roi_w));
>> + mdp5_write(mdp5_kms, REG_MDP5_LM_CURSOR_START_XY(mdp5_crtc->lm),
>> + MDP5_LM_CURSOR_START_XY_Y_START(y) |
>> + MDP5_LM_CURSOR_START_XY_X_START(x));
>> + spin_unlock_irqrestore(&mdp5_crtc->cursor.lock, flags);
>> +
>> + crtc_flush(crtc, flush_mask);
>> +
>> + return 0;
>> +}
>> +
>>  static const struct drm_crtc_funcs mdp5_crtc_funcs = {
>>   .set_config = drm_atomic_helper_set_config,
>>   .destroy = mdp5_crtc_destroy,
>> @@ -392,6 +545,8 @@ static const struct drm_crtc_funcs mdp5_crtc_funcs = {
>>   .reset = drm_atomic_helper_crtc_reset,
>>   .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
>>   .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
>> + .cursor_set = mdp5_crtc_cursor_set,
>> + .cursor_move = mdp5_crtc_cursor_move,
>>  };
>>
>>  static const struct drm_crtc_helper_funcs mdp5_crtc_helper_funcs = {
>> @@ -412,6 +567,7 @@ static void mdp5_crtc_vblank_irq(struct mdp_irq *irq, uint32_t irqstatus)
>>  {
>>   struct mdp5_crtc *mdp5_crtc = container_of(irq, struct mdp5_crtc, vblank);
>>   struct drm_crtc *crtc = &mdp5_crtc->base;
>> + struct msm_drm_private *priv = crtc->dev->dev_private;
>>   unsigned pending;
>>
>>   mdp_irq_unregister(&get_kms(crtc)->base, &mdp5_crtc->vblank);
>> @@ -421,6 +577,9 @@ static void mdp5_crtc_vblank_irq(struct mdp_irq *irq, uint32_t irqstatus)
>>   if (pending & PENDING_FLIP) {
>>   complete_flip(crtc, NULL);
>>   }
>> +
>> + if (pending & PENDING_CURSOR)
>> + drm_flip_work_commit(&mdp5_crtc->unref_cursor_work, priv->wq);
>>  }
>>
>>  static void mdp5_crtc_err_irq(struct mdp_irq *irq, uint32_t irqstatus)
>> @@ -520,6 +679,7 @@ struct drm_crtc *mdp5_crtc_init(struct drm_device *dev,
>>   mdp5_crtc->lm = GET_LM_ID(id);
>>
>>   spin_lock_init(&mdp5_crtc->lm_lock);
>> + spin_lock_init(&mdp5_crtc->cursor.lock);
>>
>>   mdp5_crtc->vblank.irq = mdp5_crtc_vblank_irq;
>>   mdp5_crtc->err.irq = mdp5_crtc_err_irq;
>> @@ -528,6 +688,10 @@ struct drm_crtc *mdp5_crtc_init(struct drm_device *dev,
>>   pipe2name(mdp5_plane_pipe(plane)), id);
>>
>>   drm_crtc_init_with_planes(dev, crtc, plane, NULL, &mdp5_crtc_funcs);
>> +
>> + drm_flip_work_init(&mdp5_crtc->unref_cursor_work,
>> + "unref cursor", unref_cursor_worker);
>> +
>>   drm_crtc_helper_add(crtc, &mdp5_crtc_helper_funcs);
>>   plane->crtc = crtc;
>>
>> --
>> Qualcomm Innovation Center, Inc.
>>
>> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
>>
>> _______________________________________________
>> dri-devel mailing list
>> dri-devel@xxxxxxxxxxxxxxxxxxxxx
>> http://lists.freedesktop.org/mailman/listinfo/dri-devel
>
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> +41 (0) 79 365 57 48 - http://blog.ffwll.ch
> _______________________________________________
> dri-devel mailing list
> dri-devel@xxxxxxxxxxxxxxxxxxxxx
> http://lists.freedesktop.org/mailman/listinfo/dri-devel
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux