Add support for temperature alarm feature in the PM8280_{1/2} PMICs.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
index 24836b6b9bbc..5de47b1434a4 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
@@ -33,6 +33,13 @@ pmc8280_1: pmic@1 {
#address-cells = <1>;
#size-cells = <0>;
+ pm8280_1_temp_alarm: temp-alarm@a00 {
+ compatible = "qcom,spmi-temp-alarm";
+ reg = <0xa00>;
+ interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+ #thermal-sensor-cells = <0>;
+ };
+
pmc8280_1_gpios: gpio@8800 {
compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio";
reg = <0x8800>;
@@ -78,6 +85,13 @@ pmc8280_2: pmic@3 {
#address-cells = <1>;
#size-cells = <0>;
+ pm8280_2_temp_alarm: temp-alarm@a00 {
+ compatible = "qcom,spmi-temp-alarm";
+ reg = <0xa00>;
+ interrupts = <0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+ #thermal-sensor-cells = <0>;
+ };
+
pmc8280_2_gpios: gpio@8800 {
compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio";
reg = <0x8800>;
--
2.25.1
