The RESIN input can be used to reset the PMK8280 PMIC. Enabling the
RESIN block allows the PMK8280 to detect reset input via RESIN_N pin.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
index 397ff4995003..4a3464f5e6e9 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
@@ -68,6 +68,12 @@ pmk8280_pon_pwrkey: pwrkey {
linux,code = <KEY_POWER>;
status = "disabled";
};
+
+ pmk8280_pon_resin: resin {
+ compatible = "qcom,pmk8350-resin";
+ interrupts = <0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
+ status = "disabled";
+ };
};
};
--
2.25.1
