Re: [PATCH v2] arm64: dts: qcom: sc7280: Add nodes to support WoW on WCN6750

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 10/3/2022 1:34 PM, Krzysztof Kozlowski wrote:
On 03/10/2022 09:59, Manikanta Pubbisetty wrote:
On 10/3/2022 10:25 AM, Manikanta Pubbisetty wrote:
On 9/28/2022 12:17 PM, Krzysztof Kozlowski wrote:
On 28/09/2022 08:00, Manikanta Pubbisetty wrote:
On 9/26/2022 2:30 PM, Krzysztof Kozlowski wrote:
On 26/09/2022 06:57, Manikanta Pubbisetty wrote:
Add DT nodes to support WoW (Wake on Wireless) feature on WCN6750
WiFi hardware on SC7280 SoC.

Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@xxxxxxxxxxx>

Thank you for your patch. There is something to discuss/improve.


---
Changes from V1:
- Rebased on ToT

    arch/arm64/boot/dts/qcom/sc7280.dtsi | 13 +++++++++++++
    1 file changed, 13 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi
b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 212580316d3e..3f6a3f575339 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -752,6 +752,17 @@ wpss_smp2p_in: slave-kernel {
                interrupt-controller;
                #interrupt-cells = <2>;
            };
+
+        wlan_smp2p_out: wlan-ap-to-wpss {

Does not look like you tested the DTS against bindings. Please run
`make
dtbs_check` (see Documentation/devicetree/bindings/writing-schema.rst
for instructions).


I'm sorry I was not aware of checking the DTS against bindings. I'll do
the due diligence going forward. `make dtbs_check is throwing error of
"No rule to make target". Not sure if we need pass any options to the
command. I did try to understand the problem but all went in vain. Pls
help understand if I'm missing anything.

There is doc explaining possible usage, but in general works perfect
without argument. If you do not have such target, means you run it on
some ancient kernel, so anyway patch cannot be accepted and has to be
rebased. Please always develop on newest kernel - newest mainline rc,
maintainer's for-next branch or linux-next.


I'm working on the latest kernel (ath.git which is maintained by Kalle
Valo for Atheros drivers). I'll give a try on the linux-next branch once.

Thanks for the suggestions.


Hi Krzysztof,

I have tested the DTS against the bindings. Have used this command `make
CROSS_COMPILE=aarch64-linux-gnu- ARCH=arm64 dtbs_check -m
DT_SCHEMA_FILES=Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml`.

`make dtbs_check` did not report any error.

You selected some schema to test, so yes, maybe it passes. It's not a
proof of anything. Run with either applicable bindings (the one which I
commented about) or with all of them.

If you did it, you would see the check will fail. The bindings would
report error. There is no need to engage reviewers if bindings find the
errors for you, right?

Nodes you added here are not allowed.


Thanks for the inputs Krzysztof, I now see the following error
"smp2p-wpss: 'wlan-ap-to-wpss', 'wlan-wpss-to-ap' do not match any of the regexes: '^master-kernel|slave-kernel|ipa-ap-to-modem|ipa-modem-to-ap$'"

After making changes to the smp2p binding, I did not see this error.
Following are the changes made.

 patternProperties:
-  "^master-kernel|slave-kernel|ipa-ap-to-modem|ipa-modem-to-ap$":
+ "^master-kernel|slave-kernel|ipa-ap-to-modem|ipa-modem-to-ap|wlan-ap-to-wpss|wlan-wpss-to-ap$":

Shall I go ahead and make the smp2p binding change?

Thanks,
Manikanta



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux