[PATCH 5/5] drm/dsc: Prevent negative BPG offsets from shadowing adjacent bitfields

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



msm's dsi_host specifies negative BPG offsets which fill the full 8 bits
of a char thanks to two's complement: this however results in those bits
bleeding into the next parameter when the field is only expected to
contain 6-bit wide values.
As a consequence random slices appear corrupted on-screen (tested on a
Sony Tama Akatsuki device with sdm845).

Use AND operators to limit all values that constitute the RC Range
parameter fields to their expected size.

Fixes: b9080324d6ca ("drm/msm/dsi: add support for dsc data")
Signed-off-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
---
 drivers/gpu/drm/display/drm_dsc_helper.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/display/drm_dsc_helper.c b/drivers/gpu/drm/display/drm_dsc_helper.c
index c869c6e51e2b..2e7ef242685d 100644
--- a/drivers/gpu/drm/display/drm_dsc_helper.c
+++ b/drivers/gpu/drm/display/drm_dsc_helper.c
@@ -243,11 +243,11 @@ void drm_dsc_pps_payload_pack(struct drm_dsc_picture_parameter_set *pps_payload,
 	 */
 	for (i = 0; i < DSC_NUM_BUF_RANGES; i++) {
 		pps_payload->rc_range_parameters[i] =
-			cpu_to_be16((dsc_cfg->rc_range_params[i].range_min_qp <<
+			cpu_to_be16(((dsc_cfg->rc_range_params[i].range_min_qp & 0x1f) <<
 				     DSC_PPS_RC_RANGE_MINQP_SHIFT) |
-				    (dsc_cfg->rc_range_params[i].range_max_qp <<
+				    ((dsc_cfg->rc_range_params[i].range_max_qp & 0x1f) <<
 				     DSC_PPS_RC_RANGE_MAXQP_SHIFT) |
-				    (dsc_cfg->rc_range_params[i].range_bpg_offset));
+				    (dsc_cfg->rc_range_params[i].range_bpg_offset & 0x3f));
 	}
 
 	/* PPS 88 */
-- 
2.37.3




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux