On 29/09/2022 13:12, Krzysztof Kozlowski wrote:
On 29/09/2022 12:56, Neil Armstrong wrote:
On 29/09/2022 11:12, Krzysztof Kozlowski wrote:
On 29/09/2022 10:29, Neil Armstrong wrote:
Hi,
On 28/09/2022 20:03, Krzysztof Kozlowski wrote:
On 28/09/2022 11:14, Neil Armstrong wrote:
The PMIC is an PM8018, but was compatible with the PM8921. Both compatibles
was left but it makes no sense anymore the leave both.
Why? It makes sense for backwards compatibility. If you think it does
not make sense, please say why.
We had the same debate at submission 7y ago, some of the pm8018 new compatible
were rejected in bindings & drivers so I left both...
As of today only the pwrkey bindings is missing, so should I resubmit the pm8018-pwrkey bidings and
drop the pm8921-pwrkey compatible ?
~7 years ago here:
https://lore.kernel.org/all/20160624220748.GB11719@dtor-ws/
you proposed to add something entirely different than we have here now
and than we talk about.
In that thread you correctly wrote:
"My point of view is that the devicetree describes the hardware and need
to have SoC specific compatible string since it describes the actual
silicon, and drivers must make sure to handle all the SoC or family
variants using the compatible string and the match data."
And I'm happy this is still the policy! And I'm tried my best to follow this
in all my DT & bindings submissions, while DT-Schema helped a lot here.
but implemented it entirely different. Maybe you refer to different mail
thread, I don't know, but that one is indeed wrong.
In the meantime things got much better, but at that time pushing a SoC bringup
was a pain (I did 2 at the time, the other one is the OX810SE) and I even
mentioned it in a talk ([1] slides 27 to 30).
So I added both to be sure that at some point a driver would probe against
one of the compatible entries...
The DTS looks correct unless you have some real argument that it is not.
How this should be fixed? First, drop bogus entries from drivers, then
document proper compatibles.
What do you mean ? There's no point to keep the PM8921 compatibles, the gpio
I asked at beginning - why? Why there is no point to keep them?
Because the HW is an PM8018 and the addition of the PM8921 was for policy/organization/struggling-to-make-dt-merged-before-clear-dt-policy/...
so you say I should modify the Bindings to reflect the actual "pm8018", "pm8921" situation instead of changing the DT even if incorrect ?
and PMIC bindings already enforces to only have the PM8018 compatible.
That is just partial argument because binding does not match DTS. So
something is not correct. Why do you assume bindings are correct?
Because bindings accurately reflects HW and DT doesn't.
The only issue is about the PM8018 pwrkey, where the solution would be
to actually re-submit [1] by documenting qcom,pm8018-pwrkey and adding the entry
in the drivers/input/misc/pmic8xxx-pwrkey.c driver.
Or maybe I missed something.
[1] https://www.slideshare.net/superna/elce-2016-neil-armstrong-no-its-never-too-late-to-upstream-your-legacy-linux-based-platform
[2] https://lore.kernel.org/all/1466759887-25394-3-git-send-email-narmstrong@xxxxxxxxxxxx/
So let's repeat again: the patch [2] looks wrong. The qcom,pm8018-pwrkey
and qcom,pm8921-pwrkey are compatible.
Ok, I need time to understand, I'm highly confused now.
Best regards,
Krzysztof
