On Wed 06 Jul 17:53 CDT 2022, Christian Marangi wrote:
> Now that these clock are defined as fixed clk in dts, we can drop the
> register_board_clk for cxo_board and pxo_board in gcc_ipq806x_probe.
>
Are you trying to say, that now that we have .fw_name based lookup of
these clocks we don't need the globally registered [cp]xo clocks to
bridge towards the [cp]xo_board_clocks which was introduced in:
30fc4212d541 ("arm: dts: qcom: Add more board clocks")
I think this change would work out if you also replace .name = "pxo"
with .name = "pxo_board_clk" (and same for cxo)...
But I don't think we can just drop these, as it would break
compatibility with existing devicetree.
Regards,
Bjorn
> Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
> ---
> drivers/clk/qcom/gcc-ipq806x.c | 8 --------
> 1 file changed, 8 deletions(-)
>
> diff --git a/drivers/clk/qcom/gcc-ipq806x.c b/drivers/clk/qcom/gcc-ipq806x.c
> index 718de17a1e60..883629de2751 100644
> --- a/drivers/clk/qcom/gcc-ipq806x.c
> +++ b/drivers/clk/qcom/gcc-ipq806x.c
> @@ -3384,14 +3384,6 @@ static int gcc_ipq806x_probe(struct platform_device *pdev)
> struct regmap *regmap;
> int ret;
>
> - ret = qcom_cc_register_board_clk(dev, "cxo_board", "cxo", 25000000);
> - if (ret)
> - return ret;
> -
> - ret = qcom_cc_register_board_clk(dev, "pxo_board", "pxo", 25000000);
> - if (ret)
> - return ret;
> -
> if (of_machine_is_compatible("qcom,ipq8065")) {
> ubi32_core1_src_clk.freq_tbl = clk_tbl_nss_ipq8065;
> ubi32_core2_src_clk.freq_tbl = clk_tbl_nss_ipq8065;
> --
> 2.36.1
>
