Trying to convert every driver used by ipq806x to parent_data api, I notice RPM was still using pxo_board clk. pxo and pxo_board are the same clock and are defined just to handle old clock definition. It was discovered that rpm is the last driver using pxo_board instead of pxo. While updating the rpm driver I notice the documentation was also wrong, so this series also fix that. v2: - Add review tag to DTS patch - Drop clock-output-names patch - Use pxo/cxo_board clock names - Remove if nesting from Documentation - Use min/maxItems in Documentation to describe clocks Christian Marangi (4): dt-bindings: clock: fix wrong clock documentation for qcom,rpmcc ARM: DTS: qcom: add rpmcc missing clocks for apq/ipq8064 and msm8660 clk: qcom: clk-rpm: convert to parent_data API clk: qcom: gcc-ipq806x: remove cc_register_board for pxo and cxo .../devicetree/bindings/clock/qcom,rpmcc.yaml | 85 ++++++++++++++++++- arch/arm/boot/dts/qcom-apq8064.dtsi | 2 + arch/arm/boot/dts/qcom-ipq8064.dtsi | 2 + arch/arm/boot/dts/qcom-msm8660.dtsi | 4 +- drivers/clk/qcom/clk-rpm.c | 24 ++++-- drivers/clk/qcom/gcc-ipq806x.c | 8 -- 6 files changed, 106 insertions(+), 19 deletions(-) -- 2.36.1
