Re: [PATCH 5/7] arm64: dts: qcom: sc8280xp: fix USB interrupts

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jul 13, 2022 at 04:35:22PM +0200, Johan Hovold wrote:
> On Wed, Jul 13, 2022 at 09:12:28AM -0500, Andrew Halaney wrote:
> > On Wed, Jul 13, 2022 at 03:13:38PM +0200, Johan Hovold wrote:
> > > The two single-port SC8280XP USB controllers do not have an hs_phy_irq
> > > interrupt. Instead they have a pwr_event interrupt which is distinct
> > > from the former and not yet supported by the driver.
> > > 
> > > Fix the USB node interrupt names so that they match the devicetree
> > > binding.
> > > 
> > > Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform")
> > > Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
> > > ---
> > >  arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 12 ++++++++----
> > >  1 file changed, 8 insertions(+), 4 deletions(-)
> > > 
> > > diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> > > index 45cc7d714fd2..4a7aa9992f3a 100644
> > > --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> > > +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> > > @@ -1875,8 +1875,10 @@ usb_0: usb@a6f8800 {
> > >  					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
> > >  					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
> > >  					      <&pdc 138 IRQ_TYPE_LEVEL_HIGH>;
> > > -			interrupt-names = "hs_phy_irq", "dp_hs_phy_irq",
> > > -					  "dm_hs_phy_irq", "ss_phy_irq";
> > > +			interrupt-names = "pwr_event",
> > > +					  "dp_hs_phy_irq",
> > > +					  "dm_hs_phy_irq",
> > > +					  "ss_phy_irq";
> > >  
> > >  			power-domains = <&gcc USB30_PRIM_GDSC>;
> > >  
> > > @@ -1925,8 +1927,10 @@ usb_1: usb@a8f8800 {
> > >  					      <&pdc 12 IRQ_TYPE_EDGE_BOTH>,
> > >  					      <&pdc 13 IRQ_TYPE_EDGE_BOTH>,
> > >  					      <&pdc 136 IRQ_TYPE_LEVEL_HIGH>;
> > > -			interrupt-names = "hs_phy_irq", "dp_hs_phy_irq",
> > > -					  "dm_hs_phy_irq", "ss_phy_irq";
> > > +			interrupt-names = "pwr_event",
> > > +					  "dp_hs_phy_irq",
> > > +					  "dm_hs_phy_irq",
> > > +					  "ss_phy_irq";
> > 
> > For this specific change to pwr_event:
> > 
> >     Reviewed-by: Andrew Halaney <ahalaney@xxxxxxxxxx>
> > 
> > That being said, I was reviewing this against the (fairly old)
> > downstream release I have, and the IRQs defined there look like this:
> > 
> > 		interrupts-extended = <&pdc 12 IRQ_TYPE_EDGE_RISING>,
> > 				<&intc GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>,
> > 				<&pdc 136 IRQ_TYPE_LEVEL_HIGH>,
> > 				<&pdc 13 IRQ_TYPE_EDGE_RISING>;
> > 		interrupt-names = "dp_hs_phy_irq", "pwr_event_irq",
> > 				"ss_phy_irq", "dm_hs_phy_irq";
> > 
> > The part I want to highlight is that the "pwr_event" irq downstream maps
> > to <&intc GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>, but the current upstream
> > devicetree I'm looking at has it mapped to <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>
> > 
> > Do you happen to have any source you can also check to confirm if this
> > is a bug or not?
> 
> Good catch! I believe this is another copy-paste error when creating
> base dtsi based on some vendor source (or perhaps an error carried over
> from an earlier version).
> 
> The vendor devicetree I have access to also has 811 here, which matches
> the pattern for usb_0 (dwc3 interrupt + 1).
> 
> Do you mind if I fold a fix for that into a v2 of this patch?
> 
> Thanks for reviewing!

Sounds good, feel free to add my R-B with that change as well!

> 
> Johan
> 




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux