The two single-port SC8280XP USB controllers do not have an hs_phy_irq
interrupt. Instead they have a pwr_event interrupt which is distinct
from the former and not yet supported by the driver.
Fix the USB node interrupt names so that they match the devicetree
binding.
Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform")
Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index 45cc7d714fd2..4a7aa9992f3a 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -1875,8 +1875,10 @@ usb_0: usb@a6f8800 {
<&pdc 14 IRQ_TYPE_EDGE_BOTH>,
<&pdc 15 IRQ_TYPE_EDGE_BOTH>,
<&pdc 138 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hs_phy_irq", "dp_hs_phy_irq",
- "dm_hs_phy_irq", "ss_phy_irq";
+ interrupt-names = "pwr_event",
+ "dp_hs_phy_irq",
+ "dm_hs_phy_irq",
+ "ss_phy_irq";
power-domains = <&gcc USB30_PRIM_GDSC>;
@@ -1925,8 +1927,10 @@ usb_1: usb@a8f8800 {
<&pdc 12 IRQ_TYPE_EDGE_BOTH>,
<&pdc 13 IRQ_TYPE_EDGE_BOTH>,
<&pdc 136 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hs_phy_irq", "dp_hs_phy_irq",
- "dm_hs_phy_irq", "ss_phy_irq";
+ interrupt-names = "pwr_event",
+ "dp_hs_phy_irq",
+ "dm_hs_phy_irq",
+ "ss_phy_irq";
power-domains = <&gcc USB30_SEC_GDSC>;
--
2.35.1
