On 04-07-22, 13:27, Pierre Gondois wrote:
> v2:
> - Rebased on v5.19-rc5
> - Changed irq checks from '< 0' to '<= 0' to be aligned
>
> The patch-set was tested on a rb5 with an old firmware version:
> UEFI Ver : 5.0.210817.BOOT.XF.3.2-00354-SM8250-1
> Build Info : 64b Aug 17 2021 23:35:39
>
> commit ffd6cc92ab9c ("arm64: dts: qcom: sm8250: add description of dcvsh
> interrupts")
> enables DCVS (Dynamic Clock and Voltage Scaling) for sm8250 chips
> (so rb5 included). As no LMH (Limits Management Hardware) interrupts
> were seen, the firmware used for testing should not be able support
> them.
>
> This patch-set should still contain relevant modifications regarding
> LMH interrupts and CPU hotplug. Still, it would be good to test
> it on a platform which actually uses LMH interrupts.
>
> Pierre Gondois (4):
> cpufreq: qcom-hw: Reset cancel_throttle when policy is re-enabled
> cpufreq: qcom-hw: Disable LMH irq when disabling policy
> cpufreq: qcom-hw: Remove deprecated irq_set_affinity_hint() call
> cpufreq: Change order of online() CB and policy->cpus modification
>
> drivers/cpufreq/cpufreq.c | 6 +++---
> drivers/cpufreq/qcom-cpufreq-hw.c | 11 ++++++++---
> 2 files changed, 11 insertions(+), 6 deletions(-)
Applied. Thanks.
--
viresh
