[PATCH v2 0/4] qcom-cpufreq-hw LMH irq/hotplug interractions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



v2:
- Rebased on v5.19-rc5
- Changed irq checks from '< 0' to '<= 0' to be aligned

The patch-set was tested on a rb5 with an old firmware version:
UEFI Ver    : 5.0.210817.BOOT.XF.3.2-00354-SM8250-1
Build Info  : 64b Aug 17 2021 23:35:39

commit ffd6cc92ab9c ("arm64: dts: qcom: sm8250: add description of dcvsh
interrupts")
enables DCVS (Dynamic Clock and Voltage Scaling) for sm8250 chips
(so rb5 included). As no LMH (Limits Management Hardware) interrupts
were seen, the firmware used for testing should not be able support
them.

This patch-set should still contain relevant modifications regarding
LMH interrupts and CPU hotplug. Still, it would be good to test
it on a platform which actually uses LMH interrupts.

Pierre Gondois (4):
  cpufreq: qcom-hw: Reset cancel_throttle when policy is re-enabled
  cpufreq: qcom-hw: Disable LMH irq when disabling policy
  cpufreq: qcom-hw: Remove deprecated irq_set_affinity_hint() call
  cpufreq: Change order of online() CB and policy->cpus modification

 drivers/cpufreq/cpufreq.c         |  6 +++---
 drivers/cpufreq/qcom-cpufreq-hw.c | 11 ++++++++---
 2 files changed, 11 insertions(+), 6 deletions(-)

-- 
2.25.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux