This patch adds USB OTG support on USB1 of APQ8064 SOC. Tested on IFC6410 with ethernet gadget. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx> --- arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 14 +++++++++ arch/arm/boot/dts/qcom-apq8064.dtsi | 46 ++++++++++++++++++++++++++++++ 2 files changed, 60 insertions(+) diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index d6036b8..f41fb39 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -40,6 +40,11 @@ }; }; + /* OTG */ + usb1_phy:phy@12500000 { + status = "ok"; + }; + usb3_phy:phy@12520000 { status = "ok"; }; @@ -48,6 +53,15 @@ status = "ok"; }; + gadget1:gadget@12500000 { + status = "ok"; + }; + + /* OTG */ + usb1: usb@12500000 { + status = "ok"; + }; + usb3: usb@12520000 { status = "ok"; }; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 491a136..38d3efa 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -284,6 +284,16 @@ qcom,boot-load = <50000>; }; + pm8921_l4: pm8921-l4 { + compatible = "qcom,rpm-pm8921-pldo"; + reg = <QCOM_RPM_PM8921_LDO4>; + + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + qcom,boot-load = <50000>; + }; + pm8921_l23: pm8921-l23 { compatible = "qcom,rpm-pm8921-pldo"; reg = <QCOM_RPM_PM8921_LDO23>; @@ -296,6 +306,25 @@ }; + usb1_phy:phy@12500000 { + compatible = "qcom,usb-otg-ci"; + reg = <0x12500000 0x400>; + interrupts = <0 100 0>; + status = "disabled"; + dr_mode = "host"; + + clocks = <&gcc USB_HS1_XCVR_CLK>, + <&gcc USB_HS1_H_CLK>; + clock-names = "core", "iface"; + + vddcx-supply = <&pm8921_s3>; + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l4>; + + resets = <&gcc USB_HS1_RESET>; + reset-names = "link"; + }; + usb3_phy:phy@12520000 { compatible = "qcom,usb-otg-ci"; reg = <0x12520000 0x400>; @@ -334,6 +363,23 @@ reset-names = "link"; }; + gadget1:gadget@12500000 { + compatible = "qcom,ci-hdrc"; + reg = <0x12500000 0x400>; + status = "disabled"; + dr_mode = "peripheral"; + interrupts = <0 100 0>; + usb-phy = <&usb1_phy>; + }; + + usb1: usb@12500000 { + compatible = "qcom,ehci-host"; + reg = <0x12500000 0x400>; + interrupts = <0 100 0>; + status = "disabled"; + usb-phy = <&usb1_phy>; + }; + usb3: usb@12520000 { compatible = "qcom,ehci-host"; reg = <0x12520000 0x400>; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html