Re: [PATCH 13/14] arm64: dts: qcom: msm8996: use non-empty ranges for PCIe PHYs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 05/07/2022 14:40, Johan Hovold wrote:
Clean up the PCIe PHY nodes by using a non-empty ranges property.

A matter of taste, but nevertheless:

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>


Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
---
  arch/arm64/boot/dts/qcom/msm8996.dtsi | 26 +++++++++++++-------------
  1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index b670d0412760..16869bb7d625 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -590,7 +590,7 @@ pcie_phy: phy@34000 {
  			reg = <0x00034000 0x488>;
  			#address-cells = <1>;
  			#size-cells = <1>;
-			ranges;
+			ranges = <0x0 0x00034000 0x4000>;
clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
  				<&gcc GCC_PCIE_PHY_CFG_AHB_CLK>,
@@ -603,10 +603,10 @@ pcie_phy: phy@34000 {
  			reset-names = "phy", "common", "cfg";
  			status = "disabled";
- pciephy_0: phy@35000 {
-				reg = <0x00035000 0x130>,
-				      <0x00035200 0x200>,
-				      <0x00035400 0x1dc>;
+			pciephy_0: phy@1000 {
+				reg = <0x1000 0x130>,
+				      <0x1200 0x200>,
+				      <0x1400 0x1dc>;
  				#phy-cells = <0>;
#clock-cells = <0>;
@@ -617,10 +617,10 @@ pciephy_0: phy@35000 {
  				reset-names = "lane0";
  			};
- pciephy_1: phy@36000 {
-				reg = <0x00036000 0x130>,
-				      <0x00036200 0x200>,
-				      <0x00036400 0x1dc>;
+			pciephy_1: phy@2000 {
+				reg = <0x2000 0x130>,
+				      <0x2200 0x200>,
+				      <0x2400 0x1dc>;
  				#phy-cells = <0>;
#clock-cells = <0>;
@@ -631,10 +631,10 @@ pciephy_1: phy@36000 {
  				reset-names = "lane1";
  			};
- pciephy_2: phy@37000 {
-				reg = <0x00037000 0x130>,
-				      <0x00037200 0x200>,
-				      <0x00037400 0x1dc>;
+			pciephy_2: phy@3000 {
+				reg = <0x3000 0x130>,
+				      <0x3200 0x200>,
+				      <0x3400 0x1dc>;
  				#phy-cells = <0>;
#clock-cells = <0>;


--
With best wishes
Dmitry



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux