On 6/22/2022 8:38 PM, Krzysztof Kozlowski wrote:
On 21/06/2022 18:11, Sricharan R wrote:
From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
Add support for the global clock controller found on IPQ5018
based devices.
Co-developed-by: Sricharan R <quic_srichara@xxxxxxxxxxx>
Signed-off-by: Sricharan R <quic_srichara@xxxxxxxxxxx>
Signed-off-by: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
Thank you for your patch. There is something to discuss/improve.
---
drivers/clk/qcom/Kconfig | 7 +
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/gcc-ipq5018.c | 3995 ++++++++++++++++++++++++++++++++
3 files changed, 4003 insertions(+)
create mode 100644 drivers/clk/qcom/gcc-ipq5018.c
diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index d01436be6d7a..294fb975db85 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -172,6 +172,13 @@ config IPQ_GCC_8074
i2c, USB, SD/eMMC, etc. Select this for the root clock
of ipq8074.
+config IPQ_GCC_5018
+ tristate "IPQ5018 Global Clock Controller"
+ help
+ Support for global clock controller on ipq5018 devices.
+ Say Y if you want to use peripheral devices such as UART, SPI,
+ i2c, USB, SD/eMMC, etc.
+
config MSM_GCC_8660
tristate "MSM8660 Global Clock Controller"
help
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 671cf5821af1..33ab4ce9b863 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_IPQ_GCC_4019) += gcc-ipq4019.o
obj-$(CONFIG_IPQ_GCC_6018) += gcc-ipq6018.o
obj-$(CONFIG_IPQ_GCC_806X) += gcc-ipq806x.o
obj-$(CONFIG_IPQ_GCC_8074) += gcc-ipq8074.o
+obj-$(CONFIG_IPQ_GCC_5018) += gcc-ipq5018.o
obj-$(CONFIG_IPQ_LCC_806X) += lcc-ipq806x.o
obj-$(CONFIG_MDM_GCC_9607) += gcc-mdm9607.o
obj-$(CONFIG_MDM_GCC_9615) += gcc-mdm9615.o
(...)
+
+static int gcc_ipq5018_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct regmap *regmap;
+ struct qcom_cc_desc ipq5018_desc = gcc_ipq5018_desc;
+
+ regmap = qcom_cc_map(pdev, &ipq5018_desc);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ clk_alpha_pll_configure(&ubi32_pll_main, regmap, &ubi32_pll_config);
+
+ ret = qcom_cc_really_probe(pdev, &ipq5018_desc, regmap);
return qcom_cc_really_probe(....)
ok.
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to register ipq5018 GCC clocks\n");
+ return ret;
+ }
+
+ dev_info(&pdev->dev, "Registered ipq5018 GCC clocks provider");
No probe success messages. This pollutes the log and there is other
infrastructure to check for successful probe.
ok.
+
+ return ret;
+}
+
+static struct platform_driver gcc_ipq5018_driver = {
+ .probe = gcc_ipq5018_probe,
+ .driver = {
+ .name = "qcom,gcc-ipq5018",
+ .owner = THIS_MODULE,
No need for owner.
ok.
Regards,
Sricharan
