On 21/06/2022 18:11, Sricharan R wrote:
> From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
>
> Add support for the global clock controller found on IPQ5018
> based devices.
>
> Co-developed-by: Sricharan R <quic_srichara@xxxxxxxxxxx>
> Signed-off-by: Sricharan R <quic_srichara@xxxxxxxxxxx>
> Signed-off-by: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
Thank you for your patch. There is something to discuss/improve.
> ---
> drivers/clk/qcom/Kconfig | 7 +
> drivers/clk/qcom/Makefile | 1 +
> drivers/clk/qcom/gcc-ipq5018.c | 3995 ++++++++++++++++++++++++++++++++
> 3 files changed, 4003 insertions(+)
> create mode 100644 drivers/clk/qcom/gcc-ipq5018.c
>
> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
> index d01436be6d7a..294fb975db85 100644
> --- a/drivers/clk/qcom/Kconfig
> +++ b/drivers/clk/qcom/Kconfig
> @@ -172,6 +172,13 @@ config IPQ_GCC_8074
> i2c, USB, SD/eMMC, etc. Select this for the root clock
> of ipq8074.
>
> +config IPQ_GCC_5018
> + tristate "IPQ5018 Global Clock Controller"
> + help
> + Support for global clock controller on ipq5018 devices.
> + Say Y if you want to use peripheral devices such as UART, SPI,
> + i2c, USB, SD/eMMC, etc.
> +
> config MSM_GCC_8660
> tristate "MSM8660 Global Clock Controller"
> help
> diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
> index 671cf5821af1..33ab4ce9b863 100644
> --- a/drivers/clk/qcom/Makefile
> +++ b/drivers/clk/qcom/Makefile
> @@ -26,6 +26,7 @@ obj-$(CONFIG_IPQ_GCC_4019) += gcc-ipq4019.o
> obj-$(CONFIG_IPQ_GCC_6018) += gcc-ipq6018.o
> obj-$(CONFIG_IPQ_GCC_806X) += gcc-ipq806x.o
> obj-$(CONFIG_IPQ_GCC_8074) += gcc-ipq8074.o
> +obj-$(CONFIG_IPQ_GCC_5018) += gcc-ipq5018.o
> obj-$(CONFIG_IPQ_LCC_806X) += lcc-ipq806x.o
> obj-$(CONFIG_MDM_GCC_9607) += gcc-mdm9607.o
> obj-$(CONFIG_MDM_GCC_9615) += gcc-mdm9615.o
(...)
> +
> +static int gcc_ipq5018_probe(struct platform_device *pdev)
> +{
> + int ret;
> + struct regmap *regmap;
> + struct qcom_cc_desc ipq5018_desc = gcc_ipq5018_desc;
> +
> + regmap = qcom_cc_map(pdev, &ipq5018_desc);
> + if (IS_ERR(regmap))
> + return PTR_ERR(regmap);
> +
> + clk_alpha_pll_configure(&ubi32_pll_main, regmap, &ubi32_pll_config);
> +
> + ret = qcom_cc_really_probe(pdev, &ipq5018_desc, regmap);
return qcom_cc_really_probe(....)
> + if (ret) {
> + dev_err(&pdev->dev, "Failed to register ipq5018 GCC clocks\n");
> + return ret;
> + }
> +
> + dev_info(&pdev->dev, "Registered ipq5018 GCC clocks provider");
No probe success messages. This pollutes the log and there is other
infrastructure to check for successful probe.
> +
> + return ret;
> +}
> +
> +static struct platform_driver gcc_ipq5018_driver = {
> + .probe = gcc_ipq5018_probe,
> + .driver = {
> + .name = "qcom,gcc-ipq5018",
> + .owner = THIS_MODULE,
No need for owner.
> + .of_match_table = gcc_ipq5018_match_table,
> + },
> +};
> +
> +static int __init gcc_ipq5018_init(void)
> +{
> + return platform_driver_register(&gcc_ipq5018_driver);
> +}
> +core_initcall(gcc_ipq5018_init);
> +
> +static void __exit gcc_ipq5018_exit(void)
> +{
> + platform_driver_unregister(&gcc_ipq5018_driver);
> +}
> +module_exit(gcc_ipq5018_exit);
> +
> +MODULE_DESCRIPTION("Qualcomm Technologies, Inc. GCC IPQ5018 Driver");
> +MODULE_LICENSE("GPL v2");
Best regards,
Krzysztof
