On 17.06.2022 14:29, Dmitry Baryshkov wrote:
> As we are converting this platform to use DT clock bindings, add clocks
> and clock-names properties to the MMCC device tree node.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
Sidenote: would RPM XO work here, or is it broken on 8996?
Konrad
> arch/arm64/boot/dts/qcom/msm8996.dtsi | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> index dffb87a5ee74..0c7b7cd9f23e 100644
> --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> @@ -751,6 +751,22 @@ mmcc: clock-controller@8c0000 {
> #reset-cells = <1>;
> #power-domain-cells = <1>;
> reg = <0x008c0000 0x40000>;
> + clocks = <&xo_board>,
> + <&gcc GCC_MMSS_NOC_CFG_AHB_CLK>,
> + <&gcc GPLL0>,
> + <&dsi0_phy 1>,
> + <&dsi0_phy 0>,
> + <0>,
> + <0>,
> + <0>;
> + clock-names = "xo",
> + "gcc_mmss_noc_cfg_ahb_clk",
> + "gpll0",
> + "dsi0pll",
> + "dsi0pllbyte",
> + "dsi1pll",
> + "dsi1pllbyte",
> + "hdmipll";
> assigned-clocks = <&mmcc MMPLL9_PLL>,
> <&mmcc MMPLL1_PLL>,
> <&mmcc MMPLL3_PLL>,
>
