On Wed, Jun 15, 2022 at 02:06:10AM +0200, Ansuel Smith wrote:
> Reorder structs in nandc driver to save holes.
>
> Signed-off-by: Ansuel Smith <ansuelsmth@xxxxxxxxx>
Reviewed-by: Manivannan Sadhasivam <mani@xxxxxxxxxx>
Thanks,
Mani
> ---
> drivers/mtd/nand/raw/qcom_nandc.c | 107 +++++++++++++++++-------------
> 1 file changed, 62 insertions(+), 45 deletions(-)
>
> diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
> index 1a77542c6d67..f2990d721733 100644
> --- a/drivers/mtd/nand/raw/qcom_nandc.c
> +++ b/drivers/mtd/nand/raw/qcom_nandc.c
> @@ -238,6 +238,9 @@ nandc_set_reg(chip, reg, \
> * @bam_ce - the array of BAM command elements
> * @cmd_sgl - sgl for NAND BAM command pipe
> * @data_sgl - sgl for NAND BAM consumer/producer pipe
> + * @last_data_desc - last DMA desc in data channel (tx/rx).
> + * @last_cmd_desc - last DMA desc in command channel.
> + * @txn_done - completion for NAND transfer.
> * @bam_ce_pos - the index in bam_ce which is available for next sgl
> * @bam_ce_start - the index in bam_ce which marks the start position ce
> * for current sgl. It will be used for size calculation
> @@ -250,14 +253,14 @@ nandc_set_reg(chip, reg, \
> * @rx_sgl_start - start index in data sgl for rx.
> * @wait_second_completion - wait for second DMA desc completion before making
> * the NAND transfer completion.
> - * @txn_done - completion for NAND transfer.
> - * @last_data_desc - last DMA desc in data channel (tx/rx).
> - * @last_cmd_desc - last DMA desc in command channel.
> */
> struct bam_transaction {
> struct bam_cmd_element *bam_ce;
> struct scatterlist *cmd_sgl;
> struct scatterlist *data_sgl;
> + struct dma_async_tx_descriptor *last_data_desc;
> + struct dma_async_tx_descriptor *last_cmd_desc;
> + struct completion txn_done;
> u32 bam_ce_pos;
> u32 bam_ce_start;
> u32 cmd_sgl_pos;
> @@ -267,25 +270,23 @@ struct bam_transaction {
> u32 rx_sgl_pos;
> u32 rx_sgl_start;
> bool wait_second_completion;
> - struct completion txn_done;
> - struct dma_async_tx_descriptor *last_data_desc;
> - struct dma_async_tx_descriptor *last_cmd_desc;
> };
>
> /*
> * This data type corresponds to the nand dma descriptor
> + * @dma_desc - low level DMA engine descriptor
> * @list - list for desc_info
> - * @dir - DMA transfer direction
> + *
> * @adm_sgl - sgl which will be used for single sgl dma descriptor. Only used by
> * ADM
> * @bam_sgl - sgl which will be used for dma descriptor. Only used by BAM
> * @sgl_cnt - number of SGL in bam_sgl. Only used by BAM
> - * @dma_desc - low level DMA engine descriptor
> + * @dir - DMA transfer direction
> */
> struct desc_info {
> + struct dma_async_tx_descriptor *dma_desc;
> struct list_head node;
>
> - enum dma_data_direction dir;
> union {
> struct scatterlist adm_sgl;
> struct {
> @@ -293,7 +294,7 @@ struct desc_info {
> int sgl_cnt;
> };
> };
> - struct dma_async_tx_descriptor *dma_desc;
> + enum dma_data_direction dir;
> };
>
> /*
> @@ -337,52 +338,64 @@ struct nandc_regs {
> /*
> * NAND controller data struct
> *
> - * @controller: base controller structure
> - * @host_list: list containing all the chips attached to the
> - * controller
> * @dev: parent device
> + *
> * @base: MMIO base
> - * @base_phys: physical base address of controller registers
> - * @base_dma: dma base address of controller registers
> + *
> * @core_clk: controller clock
> * @aon_clk: another controller clock
> *
> + * @regs: a contiguous chunk of memory for DMA register
> + * writes. contains the register values to be
> + * written to controller
> + *
> + * @props: properties of current NAND controller,
> + * initialized via DT match data
> + *
> + * @controller: base controller structure
> + * @host_list: list containing all the chips attached to the
> + * controller
> + *
> * @chan: dma channel
> * @cmd_crci: ADM DMA CRCI for command flow control
> * @data_crci: ADM DMA CRCI for data flow control
> + *
> * @desc_list: DMA descriptor list (list of desc_infos)
> *
> * @data_buffer: our local DMA buffer for page read/writes,
> * used when we can't use the buffer provided
> * by upper layers directly
> - * @buf_size/count/start: markers for chip->legacy.read_buf/write_buf
> - * functions
> * @reg_read_buf: local buffer for reading back registers via DMA
> + *
> + * @base_phys: physical base address of controller registers
> + * @base_dma: dma base address of controller registers
> * @reg_read_dma: contains dma address for register read buffer
> - * @reg_read_pos: marker for data read in reg_read_buf
> *
> - * @regs: a contiguous chunk of memory for DMA register
> - * writes. contains the register values to be
> - * written to controller
> - * @cmd1/vld: some fixed controller register values
> - * @props: properties of current NAND controller,
> - * initialized via DT match data
> + * @buf_size/count/start: markers for chip->legacy.read_buf/write_buf
> + * functions
> * @max_cwperpage: maximum QPIC codewords required. calculated
> * from all connected NAND devices pagesize
> + *
> + * @reg_read_pos: marker for data read in reg_read_buf
> + *
> + * @cmd1/vld: some fixed controller register values
> */
> struct qcom_nand_controller {
> - struct nand_controller controller;
> - struct list_head host_list;
> -
> struct device *dev;
>
> void __iomem *base;
> - phys_addr_t base_phys;
> - dma_addr_t base_dma;
>
> struct clk *core_clk;
> struct clk *aon_clk;
>
> + struct nandc_regs *regs;
> + struct bam_transaction *bam_txn;
> +
> + const struct qcom_nandc_props *props;
> +
> + struct nand_controller controller;
> + struct list_head host_list;
> +
> union {
> /* will be used only by QPIC for BAM DMA */
> struct {
> @@ -400,22 +413,22 @@ struct qcom_nand_controller {
> };
>
> struct list_head desc_list;
> - struct bam_transaction *bam_txn;
>
> u8 *data_buffer;
> + __le32 *reg_read_buf;
> +
> + phys_addr_t base_phys;
> + dma_addr_t base_dma;
> + dma_addr_t reg_read_dma;
> +
> int buf_size;
> int buf_count;
> int buf_start;
> unsigned int max_cwperpage;
>
> - __le32 *reg_read_buf;
> - dma_addr_t reg_read_dma;
> int reg_read_pos;
>
> - struct nandc_regs *regs;
> -
> u32 cmd1, vld;
> - const struct qcom_nandc_props *props;
> };
>
> /*
> @@ -431,19 +444,21 @@ struct qcom_nand_controller {
> * and reserved bytes
> * @cw_data: the number of bytes within a codeword protected
> * by ECC
> - * @use_ecc: request the controller to use ECC for the
> - * upcoming read/write
> - * @bch_enabled: flag to tell whether BCH ECC mode is used
> * @ecc_bytes_hw: ECC bytes used by controller hardware for this
> * chip
> - * @status: value to be returned if NAND_CMD_STATUS command
> - * is executed
> + *
> * @last_command: keeps track of last command on this chip. used
> * for reading correct status
> *
> * @cfg0, cfg1, cfg0_raw..: NANDc register configurations needed for
> * ecc/non-ecc mode for the current nand flash
> * device
> + *
> + * @status: value to be returned if NAND_CMD_STATUS command
> + * is executed
> + * @use_ecc: request the controller to use ECC for the
> + * upcoming read/write
> + * @bch_enabled: flag to tell whether BCH ECC mode is used
> */
> struct qcom_nand_host {
> struct nand_chip chip;
> @@ -452,12 +467,10 @@ struct qcom_nand_host {
> int cs;
> int cw_size;
> int cw_data;
> - bool use_ecc;
> - bool bch_enabled;
> int ecc_bytes_hw;
> int spare_bytes;
> int bbm_size;
> - u8 status;
> +
> int last_command;
>
> u32 cfg0, cfg1;
> @@ -466,23 +479,27 @@ struct qcom_nand_host {
> u32 ecc_bch_cfg;
> u32 clrflashstatus;
> u32 clrreadstatus;
> +
> + u8 status;
> + bool use_ecc;
> + bool bch_enabled;
> };
>
> /*
> * This data type corresponds to the NAND controller properties which varies
> * among different NAND controllers.
> * @ecc_modes - ecc mode for NAND
> + * @dev_cmd_reg_start - NAND_DEV_CMD_* registers starting offset
> * @is_bam - whether NAND controller is using BAM
> * @is_qpic - whether NAND CTRL is part of qpic IP
> * @qpic_v2 - flag to indicate QPIC IP version 2
> - * @dev_cmd_reg_start - NAND_DEV_CMD_* registers starting offset
> */
> struct qcom_nandc_props {
> u32 ecc_modes;
> + u32 dev_cmd_reg_start;
> bool is_bam;
> bool is_qpic;
> bool qpic_v2;
> - u32 dev_cmd_reg_start;
> };
>
> /* Frees the BAM transaction memory */
> --
> 2.36.1
>
--
மணிவண்ணன் சதாசிவம்
