Re: [PATCH v7 1/3] mtd: nand: raw: qcom_nandc: reorder qcom_nand_host struct

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jun 16, 2022 at 02:18:08AM +0200, Ansuel Smith wrote:
> On Wed, Jun 15, 2022 at 10:41:32PM +0530, Manivannan Sadhasivam wrote:
> > On Wed, Jun 15, 2022 at 02:06:10AM +0200, Ansuel Smith wrote:
> > > Reorder structs in nandc driver to save holes.
> > > 
> > > Signed-off-by: Ansuel Smith <ansuelsmth@xxxxxxxxx>
> > 
> > Reviewed-by: Manivannan Sadhasivam <mani@xxxxxxxxxx>
> > 
> > Thanks,
> > Mani
> >
> 
> I'm sending v8 with a different Sob so I'm not adding the review tag (in
> v8).
> In short the new Sob is what I will use onwards, wanted to keep the
> Ansuel reference but it was suggested to use Christian Marangi and
> nothing more. It's just a name change and we are the same person and
> nobody is stealing ownership of the patch.
> Sorry for the mess.
> 

That's fine but you could've kept the review tags... Anyway, I'll give mine.

Thanks,
Mani

> > > ---
> > >  drivers/mtd/nand/raw/qcom_nandc.c | 107 +++++++++++++++++-------------
> > >  1 file changed, 62 insertions(+), 45 deletions(-)
> > > 
> > > diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
> > > index 1a77542c6d67..f2990d721733 100644
> > > --- a/drivers/mtd/nand/raw/qcom_nandc.c
> > > +++ b/drivers/mtd/nand/raw/qcom_nandc.c
> > > @@ -238,6 +238,9 @@ nandc_set_reg(chip, reg,			\
> > >   * @bam_ce - the array of BAM command elements
> > >   * @cmd_sgl - sgl for NAND BAM command pipe
> > >   * @data_sgl - sgl for NAND BAM consumer/producer pipe
> > > + * @last_data_desc - last DMA desc in data channel (tx/rx).
> > > + * @last_cmd_desc - last DMA desc in command channel.
> > > + * @txn_done - completion for NAND transfer.
> > >   * @bam_ce_pos - the index in bam_ce which is available for next sgl
> > >   * @bam_ce_start - the index in bam_ce which marks the start position ce
> > >   *		   for current sgl. It will be used for size calculation
> > > @@ -250,14 +253,14 @@ nandc_set_reg(chip, reg,			\
> > >   * @rx_sgl_start - start index in data sgl for rx.
> > >   * @wait_second_completion - wait for second DMA desc completion before making
> > >   *			     the NAND transfer completion.
> > > - * @txn_done - completion for NAND transfer.
> > > - * @last_data_desc - last DMA desc in data channel (tx/rx).
> > > - * @last_cmd_desc - last DMA desc in command channel.
> > >   */
> > >  struct bam_transaction {
> > >  	struct bam_cmd_element *bam_ce;
> > >  	struct scatterlist *cmd_sgl;
> > >  	struct scatterlist *data_sgl;
> > > +	struct dma_async_tx_descriptor *last_data_desc;
> > > +	struct dma_async_tx_descriptor *last_cmd_desc;
> > > +	struct completion txn_done;
> > >  	u32 bam_ce_pos;
> > >  	u32 bam_ce_start;
> > >  	u32 cmd_sgl_pos;
> > > @@ -267,25 +270,23 @@ struct bam_transaction {
> > >  	u32 rx_sgl_pos;
> > >  	u32 rx_sgl_start;
> > >  	bool wait_second_completion;
> > > -	struct completion txn_done;
> > > -	struct dma_async_tx_descriptor *last_data_desc;
> > > -	struct dma_async_tx_descriptor *last_cmd_desc;
> > >  };
> > >  
> > >  /*
> > >   * This data type corresponds to the nand dma descriptor
> > > + * @dma_desc - low level DMA engine descriptor
> > >   * @list - list for desc_info
> > > - * @dir - DMA transfer direction
> > > + *
> > >   * @adm_sgl - sgl which will be used for single sgl dma descriptor. Only used by
> > >   *	      ADM
> > >   * @bam_sgl - sgl which will be used for dma descriptor. Only used by BAM
> > >   * @sgl_cnt - number of SGL in bam_sgl. Only used by BAM
> > > - * @dma_desc - low level DMA engine descriptor
> > > + * @dir - DMA transfer direction
> > >   */
> > >  struct desc_info {
> > > +	struct dma_async_tx_descriptor *dma_desc;
> > >  	struct list_head node;
> > >  
> > > -	enum dma_data_direction dir;
> > >  	union {
> > >  		struct scatterlist adm_sgl;
> > >  		struct {
> > > @@ -293,7 +294,7 @@ struct desc_info {
> > >  			int sgl_cnt;
> > >  		};
> > >  	};
> > > -	struct dma_async_tx_descriptor *dma_desc;
> > > +	enum dma_data_direction dir;
> > >  };
> > >  
> > >  /*
> > > @@ -337,52 +338,64 @@ struct nandc_regs {
> > >  /*
> > >   * NAND controller data struct
> > >   *
> > > - * @controller:			base controller structure
> > > - * @host_list:			list containing all the chips attached to the
> > > - *				controller
> > >   * @dev:			parent device
> > > + *
> > >   * @base:			MMIO base
> > > - * @base_phys:			physical base address of controller registers
> > > - * @base_dma:			dma base address of controller registers
> > > + *
> > >   * @core_clk:			controller clock
> > >   * @aon_clk:			another controller clock
> > >   *
> > > + * @regs:			a contiguous chunk of memory for DMA register
> > > + *				writes. contains the register values to be
> > > + *				written to controller
> > > + *
> > > + * @props:			properties of current NAND controller,
> > > + *				initialized via DT match data
> > > + *
> > > + * @controller:			base controller structure
> > > + * @host_list:			list containing all the chips attached to the
> > > + *				controller
> > > + *
> > >   * @chan:			dma channel
> > >   * @cmd_crci:			ADM DMA CRCI for command flow control
> > >   * @data_crci:			ADM DMA CRCI for data flow control
> > > + *
> > >   * @desc_list:			DMA descriptor list (list of desc_infos)
> > >   *
> > >   * @data_buffer:		our local DMA buffer for page read/writes,
> > >   *				used when we can't use the buffer provided
> > >   *				by upper layers directly
> > > - * @buf_size/count/start:	markers for chip->legacy.read_buf/write_buf
> > > - *				functions
> > >   * @reg_read_buf:		local buffer for reading back registers via DMA
> > > + *
> > > + * @base_phys:			physical base address of controller registers
> > > + * @base_dma:			dma base address of controller registers
> > >   * @reg_read_dma:		contains dma address for register read buffer
> > > - * @reg_read_pos:		marker for data read in reg_read_buf
> > >   *
> > > - * @regs:			a contiguous chunk of memory for DMA register
> > > - *				writes. contains the register values to be
> > > - *				written to controller
> > > - * @cmd1/vld:			some fixed controller register values
> > > - * @props:			properties of current NAND controller,
> > > - *				initialized via DT match data
> > > + * @buf_size/count/start:	markers for chip->legacy.read_buf/write_buf
> > > + *				functions
> > >   * @max_cwperpage:		maximum QPIC codewords required. calculated
> > >   *				from all connected NAND devices pagesize
> > > + *
> > > + * @reg_read_pos:		marker for data read in reg_read_buf
> > > + *
> > > + * @cmd1/vld:			some fixed controller register values
> > >   */
> > >  struct qcom_nand_controller {
> > > -	struct nand_controller controller;
> > > -	struct list_head host_list;
> > > -
> > >  	struct device *dev;
> > >  
> > >  	void __iomem *base;
> > > -	phys_addr_t base_phys;
> > > -	dma_addr_t base_dma;
> > >  
> > >  	struct clk *core_clk;
> > >  	struct clk *aon_clk;
> > >  
> > > +	struct nandc_regs *regs;
> > > +	struct bam_transaction *bam_txn;
> > > +
> > > +	const struct qcom_nandc_props *props;
> > > +
> > > +	struct nand_controller controller;
> > > +	struct list_head host_list;
> > > +
> > >  	union {
> > >  		/* will be used only by QPIC for BAM DMA */
> > >  		struct {
> > > @@ -400,22 +413,22 @@ struct qcom_nand_controller {
> > >  	};
> > >  
> > >  	struct list_head desc_list;
> > > -	struct bam_transaction *bam_txn;
> > >  
> > >  	u8		*data_buffer;
> > > +	__le32		*reg_read_buf;
> > > +
> > > +	phys_addr_t base_phys;
> > > +	dma_addr_t base_dma;
> > > +	dma_addr_t reg_read_dma;
> > > +
> > >  	int		buf_size;
> > >  	int		buf_count;
> > >  	int		buf_start;
> > >  	unsigned int	max_cwperpage;
> > >  
> > > -	__le32 *reg_read_buf;
> > > -	dma_addr_t reg_read_dma;
> > >  	int reg_read_pos;
> > >  
> > > -	struct nandc_regs *regs;
> > > -
> > >  	u32 cmd1, vld;
> > > -	const struct qcom_nandc_props *props;
> > >  };
> > >  
> > >  /*
> > > @@ -431,19 +444,21 @@ struct qcom_nand_controller {
> > >   *				and reserved bytes
> > >   * @cw_data:			the number of bytes within a codeword protected
> > >   *				by ECC
> > > - * @use_ecc:			request the controller to use ECC for the
> > > - *				upcoming read/write
> > > - * @bch_enabled:		flag to tell whether BCH ECC mode is used
> > >   * @ecc_bytes_hw:		ECC bytes used by controller hardware for this
> > >   *				chip
> > > - * @status:			value to be returned if NAND_CMD_STATUS command
> > > - *				is executed
> > > + *
> > >   * @last_command:		keeps track of last command on this chip. used
> > >   *				for reading correct status
> > >   *
> > >   * @cfg0, cfg1, cfg0_raw..:	NANDc register configurations needed for
> > >   *				ecc/non-ecc mode for the current nand flash
> > >   *				device
> > > + *
> > > + * @status:			value to be returned if NAND_CMD_STATUS command
> > > + *				is executed
> > > + * @use_ecc:			request the controller to use ECC for the
> > > + *				upcoming read/write
> > > + * @bch_enabled:		flag to tell whether BCH ECC mode is used
> > >   */
> > >  struct qcom_nand_host {
> > >  	struct nand_chip chip;
> > > @@ -452,12 +467,10 @@ struct qcom_nand_host {
> > >  	int cs;
> > >  	int cw_size;
> > >  	int cw_data;
> > > -	bool use_ecc;
> > > -	bool bch_enabled;
> > >  	int ecc_bytes_hw;
> > >  	int spare_bytes;
> > >  	int bbm_size;
> > > -	u8 status;
> > > +
> > >  	int last_command;
> > >  
> > >  	u32 cfg0, cfg1;
> > > @@ -466,23 +479,27 @@ struct qcom_nand_host {
> > >  	u32 ecc_bch_cfg;
> > >  	u32 clrflashstatus;
> > >  	u32 clrreadstatus;
> > > +
> > > +	u8 status;
> > > +	bool use_ecc;
> > > +	bool bch_enabled;
> > >  };
> > >  
> > >  /*
> > >   * This data type corresponds to the NAND controller properties which varies
> > >   * among different NAND controllers.
> > >   * @ecc_modes - ecc mode for NAND
> > > + * @dev_cmd_reg_start - NAND_DEV_CMD_* registers starting offset
> > >   * @is_bam - whether NAND controller is using BAM
> > >   * @is_qpic - whether NAND CTRL is part of qpic IP
> > >   * @qpic_v2 - flag to indicate QPIC IP version 2
> > > - * @dev_cmd_reg_start - NAND_DEV_CMD_* registers starting offset
> > >   */
> > >  struct qcom_nandc_props {
> > >  	u32 ecc_modes;
> > > +	u32 dev_cmd_reg_start;
> > >  	bool is_bam;
> > >  	bool is_qpic;
> > >  	bool qpic_v2;
> > > -	u32 dev_cmd_reg_start;
> > >  };
> > >  
> > >  /* Frees the BAM transaction memory */
> > > -- 
> > > 2.36.1
> > > 
> > 
> > -- 
> > மணிவண்ணன் சதாசிவம்
> 
> -- 
> 	Ansuel

-- 
மணிவண்ணன் சதாசிவம்



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux