[PATCH 3/3] phy: qcom-qmp: clean up hex defines

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Use lower case hex consistently for define values.

Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
---
 drivers/phy/qualcomm/phy-qcom-qmp.h | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index 6d410826ae90..3a4f150dd499 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -30,7 +30,7 @@
 #define QSERDES_PLL_CP_CTRL_MODE0			0x080
 #define QSERDES_PLL_CP_CTRL_MODE1			0x084
 #define QSERDES_PLL_PLL_RCTRL_MODE0			0x088
-#define QSERDES_PLL_PLL_RCTRL_MODE1			0x08C
+#define QSERDES_PLL_PLL_RCTRL_MODE1			0x08c
 #define QSERDES_PLL_PLL_CCTRL_MODE0			0x090
 #define QSERDES_PLL_PLL_CCTRL_MODE1			0x094
 #define QSERDES_PLL_BIAS_EN_CTRL_BY_PSM			0x0a4
@@ -44,7 +44,7 @@
 #define QSERDES_PLL_DIV_FRAC_START3_MODE0		0x0e0
 #define QSERDES_PLL_DIV_FRAC_START1_MODE1		0x0e4
 #define QSERDES_PLL_DIV_FRAC_START2_MODE1		0x0e8
-#define QSERDES_PLL_DIV_FRAC_START3_MODE1		0x0eC
+#define QSERDES_PLL_DIV_FRAC_START3_MODE1		0x0ec
 #define QSERDES_PLL_INTEGLOOP_GAIN0_MODE0		0x100
 #define QSERDES_PLL_INTEGLOOP_GAIN1_MODE0		0x104
 #define QSERDES_PLL_INTEGLOOP_GAIN0_MODE1		0x108
@@ -270,11 +270,11 @@
 #define QPHY_RX_MIN_HIBERN8_TIME			0x140
 #define QPHY_RX_SIGDET_CTRL2				0x148
 #define QPHY_RX_PWM_GEAR_BAND				0x154
-#define QPHY_PLL_LOCK_CHK_DLY_TIME_AUXCLK_LSB		0x1A8
-#define QPHY_OSC_DTCT_ACTIONS				0x1AC
-#define QPHY_RX_SIGDET_LVL				0x1D8
-#define QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB		0x1DC
-#define QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB		0x1E0
+#define QPHY_PLL_LOCK_CHK_DLY_TIME_AUXCLK_LSB		0x1a8
+#define QPHY_OSC_DTCT_ACTIONS				0x1ac
+#define QPHY_RX_SIGDET_LVL				0x1d8
+#define QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB		0x1dc
+#define QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB		0x1e0
 
 /* Only for QMP V3 & V4 PHY - DP COM registers */
 #define QPHY_V3_DP_COM_PHY_MODE_CTRL			0x00
@@ -639,7 +639,7 @@
 #define QSERDES_V4_TX_TRAN_DRVR_EMP_EN			0xb8
 #define QSERDES_V4_TX_TX_INTERFACE_MODE			0xbc
 #define QSERDES_V4_TX_PWM_GEAR_1_DIVIDER_BAND0_1	0xd8
-#define QSERDES_V4_TX_PWM_GEAR_2_DIVIDER_BAND0_1	0xdC
+#define QSERDES_V4_TX_PWM_GEAR_2_DIVIDER_BAND0_1	0xdc
 #define QSERDES_V4_TX_PWM_GEAR_3_DIVIDER_BAND0_1	0xe0
 #define QSERDES_V4_TX_PWM_GEAR_4_DIVIDER_BAND0_1	0xe4
 #define QSERDES_V4_TX_VMODE_CTRL1			0xe8
-- 
2.35.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux