Clean up the QMP defines by removing some stray white space and making sure values are aligned. Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx> --- drivers/phy/qualcomm/phy-qcom-qmp.h | 48 ++++++++++++++--------------- 1 file changed, 24 insertions(+), 24 deletions(-) diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h index 626be0ccede2..6d410826ae90 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp.h @@ -627,8 +627,8 @@ #define QSERDES_V4_TX_INTERFACE_SELECT 0x2c #define QSERDES_V4_TX_RES_CODE_LANE_TX 0x34 #define QSERDES_V4_TX_RES_CODE_LANE_RX 0x38 -#define QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX 0x3c -#define QSERDES_V4_TX_RES_CODE_LANE_OFFSET_RX 0x40 +#define QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX 0x3c +#define QSERDES_V4_TX_RES_CODE_LANE_OFFSET_RX 0x40 #define QSERDES_V4_TX_TRANSCEIVER_BIAS_EN 0x54 #define QSERDES_V4_TX_HIGHZ_DRVR_EN 0x58 #define QSERDES_V4_TX_TX_POL_INV 0x5c @@ -678,7 +678,7 @@ #define QSERDES_V4_RX_UCDR_SB2_THRESH2 0x050 #define QSERDES_V4_RX_UCDR_SB2_GAIN1 0x054 #define QSERDES_V4_RX_UCDR_SB2_GAIN2 0x058 -#define QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE 0x060 +#define QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE 0x060 #define QSERDES_V4_RX_RCLK_AUXDATA_SEL 0x064 #define QSERDES_V4_RX_AC_JTAG_ENABLE 0x068 #define QSERDES_V4_RX_AC_JTAG_MODE 0x078 @@ -759,26 +759,26 @@ #define QSERDES_V4_20_RX_MARG_COARSE_CTRL2 0x23c /* Only for QMP V4 PHY - UFS PCS registers */ -#define QPHY_V4_PCS_UFS_PHY_START 0x000 -#define QPHY_V4_PCS_UFS_POWER_DOWN_CONTROL 0x004 -#define QPHY_V4_PCS_UFS_SW_RESET 0x008 -#define QPHY_V4_PCS_UFS_TIMER_20US_CORECLK_STEPS_MSB 0x00c -#define QPHY_V4_PCS_UFS_TIMER_20US_CORECLK_STEPS_LSB 0x010 -#define QPHY_V4_PCS_UFS_PLL_CNTL 0x02c -#define QPHY_V4_PCS_UFS_TX_LARGE_AMP_DRV_LVL 0x030 -#define QPHY_V4_PCS_UFS_TX_SMALL_AMP_DRV_LVL 0x038 -#define QPHY_V4_PCS_UFS_BIST_FIXED_PAT_CTRL 0x060 -#define QPHY_V4_PCS_UFS_TX_HSGEAR_CAPABILITY 0x074 -#define QPHY_V4_PCS_UFS_RX_HSGEAR_CAPABILITY 0x0b4 -#define QPHY_V4_PCS_UFS_DEBUG_BUS_CLKSEL 0x124 -#define QPHY_V4_PCS_UFS_LINECFG_DISABLE 0x148 -#define QPHY_V4_PCS_UFS_RX_MIN_HIBERN8_TIME 0x150 -#define QPHY_V4_PCS_UFS_RX_SIGDET_CTRL2 0x158 -#define QPHY_V4_PCS_UFS_TX_PWM_GEAR_BAND 0x160 -#define QPHY_V4_PCS_UFS_TX_HS_GEAR_BAND 0x168 +#define QPHY_V4_PCS_UFS_PHY_START 0x000 +#define QPHY_V4_PCS_UFS_POWER_DOWN_CONTROL 0x004 +#define QPHY_V4_PCS_UFS_SW_RESET 0x008 +#define QPHY_V4_PCS_UFS_TIMER_20US_CORECLK_STEPS_MSB 0x00c +#define QPHY_V4_PCS_UFS_TIMER_20US_CORECLK_STEPS_LSB 0x010 +#define QPHY_V4_PCS_UFS_PLL_CNTL 0x02c +#define QPHY_V4_PCS_UFS_TX_LARGE_AMP_DRV_LVL 0x030 +#define QPHY_V4_PCS_UFS_TX_SMALL_AMP_DRV_LVL 0x038 +#define QPHY_V4_PCS_UFS_BIST_FIXED_PAT_CTRL 0x060 +#define QPHY_V4_PCS_UFS_TX_HSGEAR_CAPABILITY 0x074 +#define QPHY_V4_PCS_UFS_RX_HSGEAR_CAPABILITY 0x0b4 +#define QPHY_V4_PCS_UFS_DEBUG_BUS_CLKSEL 0x124 +#define QPHY_V4_PCS_UFS_LINECFG_DISABLE 0x148 +#define QPHY_V4_PCS_UFS_RX_MIN_HIBERN8_TIME 0x150 +#define QPHY_V4_PCS_UFS_RX_SIGDET_CTRL2 0x158 +#define QPHY_V4_PCS_UFS_TX_PWM_GEAR_BAND 0x160 +#define QPHY_V4_PCS_UFS_TX_HS_GEAR_BAND 0x168 #define QPHY_V4_PCS_UFS_READY_STATUS 0x180 -#define QPHY_V4_PCS_UFS_TX_MID_TERM_CTRL1 0x1d8 -#define QPHY_V4_PCS_UFS_MULTI_LANE_CTRL1 0x1e0 +#define QPHY_V4_PCS_UFS_TX_MID_TERM_CTRL1 0x1d8 +#define QPHY_V4_PCS_UFS_MULTI_LANE_CTRL1 0x1e0 /* PCIE GEN3 COM registers */ #define PCIE_GEN3_QHP_COM_SSC_EN_CENTER 0x14 @@ -1140,8 +1140,8 @@ /* Only for QMP V5 PHY - TX registers */ #define QSERDES_V5_TX_RES_CODE_LANE_TX 0x34 #define QSERDES_V5_TX_RES_CODE_LANE_RX 0x38 -#define QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX 0x3c -#define QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX 0x40 +#define QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX 0x3c +#define QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX 0x40 #define QSERDES_V5_TX_LANE_MODE_1 0x84 #define QSERDES_V5_TX_LANE_MODE_2 0x88 #define QSERDES_V5_TX_LANE_MODE_3 0x8c -- 2.35.1
