Add common LED properties - the function and color - to LED nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts | 6 ++++++
arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts | 7 +++++++
2 files changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts
index 028ac8e24797..cf7da1ab177c 100644
--- a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts
+++ b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts
@@ -1,5 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
#include "qcom-ipq4018-ap120c-ac.dtsi"
/ {
@@ -10,17 +11,22 @@ leds {
power {
label = "ap120c-ac:green:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wlan {
label = "ap120c-ac:green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
};
support {
label = "ap120c-ac:green:support";
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
panic-indicator;
};
diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
index b7916fc26d68..c4f89b712fd9 100644
--- a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
+++ b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
@@ -1,5 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/leds/common.h>
#include "qcom-ipq4018-ap120c-ac.dtsi"
/ {
@@ -8,18 +9,24 @@ leds {
status: status {
label = "ap120c-ac:blue:status";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
wlan2g {
label = "ap120c-ac:green:wlan2g";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tpt";
};
wlan5g {
label = "ap120c-ac:red:wlan5g";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_RED>;
gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy1tpt";
};
--
2.34.1
