[PATCH 01/10] ARM: dts: qcom: apq8060-dragonboard: add function and color to LED nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add common LED properties - the function and color - to LED nodes.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
 arch/arm/boot/dts/qcom-apq8060-dragonboard.dts | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
index 138d6478ac84..9a4aedc5f3ea 100644
--- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
 #include "qcom-msm8660.dtsi"
@@ -416,6 +417,7 @@ led@131 {
 					compatible = "qcom,pm8058-led";
 					reg = <0x131>;
 					label = "pm8058:red";
+					color = <LED_COLOR_ID_RED>;
 					default-state = "off";
 				};
 				led@132 {
@@ -426,6 +428,7 @@ led@132 {
 					compatible = "qcom,pm8058-led";
 					reg = <0x132>;
 					label = "pm8058:yellow";
+					color = <LED_COLOR_ID_YELLOW>;
 					default-state = "off";
 					linux,default-trigger = "mmc0";
 				};
@@ -433,6 +436,8 @@ led@133 {
 					compatible = "qcom,pm8058-led";
 					reg = <0x133>;
 					label = "pm8058:green";
+					function = LED_FUNCTION_HEARTBEAT;
+					color = <LED_COLOR_ID_GREEN>;
 					default-state = "on";
 					linux,default-trigger = "heartbeat";
 				};
-- 
2.34.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux