[PATCH 2/5] proximity: vl53l0x: Prefer pre-initialized interrupt flags

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On some boards interrupt type might be different than falling edge,
like hardcoded in driver. Leave interrupt flags as they were pre-configured
from the device-tree. If they're not provided, default to falling edge
interrupts.

Signed-off-by: Markuss Broks <markuss.broks@xxxxxxxxx>
---
 drivers/iio/proximity/vl53l0x-i2c.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/iio/proximity/vl53l0x-i2c.c b/drivers/iio/proximity/vl53l0x-i2c.c
index 661a79ea200d..12a3e2eff464 100644
--- a/drivers/iio/proximity/vl53l0x-i2c.c
+++ b/drivers/iio/proximity/vl53l0x-i2c.c
@@ -16,6 +16,7 @@
 
 #include <linux/delay.h>
 #include <linux/i2c.h>
+#include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
 
@@ -57,11 +58,15 @@ static irqreturn_t vl53l0x_handle_irq(int irq, void *priv)
 static int vl53l0x_configure_irq(struct i2c_client *client,
 				 struct iio_dev *indio_dev)
 {
+	int irq_flags = irq_get_trigger_type(client->irq);
 	struct vl53l0x_data *data = iio_priv(indio_dev);
 	int ret;
 
+	if (!irq_flags)
+		irq_flags = IRQF_TRIGGER_FALLING;
+
 	ret = devm_request_irq(&client->dev, client->irq, vl53l0x_handle_irq,
-			IRQF_TRIGGER_FALLING, indio_dev->name, indio_dev);
+			irq_flags, indio_dev->name, indio_dev);
 	if (ret) {
 		dev_err(&client->dev, "devm_request_irq error: %d\n", ret);
 		return ret;
-- 
2.36.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux