Re: [PATCH v6 5/5] PCI: qcom: Drop manual pipe_clk_src handling

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, May 13, 2022 at 08:53:39PM +0300, Dmitry Baryshkov wrote:
> Manual reparenting of pipe_clk_src is being replaced with the parking of
> the clock with clk_disable()/clk_enable() in the phy driver. Drop
> redundant code switching of the pipe clock between the PHY clock source
> and the safe bi_tcxo.

Thanks for updating the commit message.

> Cc: Prasad Malisetty <quic_pmaliset@xxxxxxxxxxx>
> Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> ---
>  drivers/pci/controller/dwc/pcie-qcom.c | 39 +-------------------------
>  1 file changed, 1 insertion(+), 38 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index a6becafb6a77..b48c899bcc97 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c

> @@ -1496,14 +1461,12 @@ static const struct qcom_pcie_cfg sm8450_pcie0_cfg = {
>  static const struct qcom_pcie_cfg sm8450_pcie1_cfg = {
>  	.ops = &ops_1_9_0,
>  	.has_ddrss_sf_tbu_clk = true,
> -	.pipe_clk_need_muxing = true,
>  	.has_aggre1_clk = true,
>  };
>  
>  static const struct qcom_pcie_cfg sc7280_cfg = {
>  	.ops = &ops_1_9_0,
>  	.has_tbu_clk = true,
> -	.pipe_clk_need_muxing = true,
>  };
>  
>  static const struct dw_pcie_ops dw_pcie_ops = {

Note that this hunk fails to apply due to commit 134b5ce3ed33 ("PCI:
qcom: Remove ddrss_sf_tbu clock from SC8180X").

Fixing it up is trivial but still.

Reviewed-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
Tested-by: Johan Hovold <johan+linaro@xxxxxxxxxx>

Johan



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux