[PATCH 6/6] arm64: dts: ipq8074: add VQMMC supply

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



SDHCI controller claims DDR, HS200 and HS400 1.8V support, however it
cannot achieve those using the 2.95V I/O that is the default set by
firmware.

Since we know have access to the PMP8074 PMIC provided LDO that provides
the I/O voltage set it as VQMMC supply so that higher speeds can actually
be achieved.

Signed-off-by: Robert Marko <robimarko@xxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/ipq8074.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 906468ee990e..2e8765aa8f37 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -476,6 +476,8 @@ sdhc_1: sdhci@7824900 {
 			mmc-hs400-1_8v;
 			bus-width = <8>;
 
+			vqmmc-supply = <&l11>;
+
 			status = "disabled";
 		};
 
-- 
2.36.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux