Re: [PATCH] ath10k: do not enforce interrupt trigger type

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 5/14/22 12:05 AM, Steev Klimaszewski wrote:

On 5/13/22 10:57 AM, Kalle Valo wrote:
Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> writes:

Interrupt line can be configured on different hardware in different way,
even inverted.  Therefore driver should not enforce specific trigger
type - edge rising - but instead rely on Devicetree to configure it.

All Qualcomm DTSI with WCN3990 define the interrupt type as level high,
so the mismatch between DTSI and driver causes rebind issues:

   $ echo 18800000.wifi > /sys/bus/platform/drivers/ath10k_snoc/unbind
   $ echo 18800000.wifi > /sys/bus/platform/drivers/ath10k_snoc/bind
   [   44.763114] irq: type mismatch, failed to map hwirq-446 for interrupt-controller@17a00000!    [   44.763130] ath10k_snoc 18800000.wifi: error -ENXIO: IRQ index 0 not found    [   44.763140] ath10k_snoc 18800000.wifi: failed to initialize resource: -6
So you tested on WCN3990? On what firmware version? I can add the
Tested-on tag if you provide that.

Hello Krzystof, Kalle,

I have seen this issue as well on a Lenovo Flex 5G, which has a WCN3990:

wcn3990 hw1.0 target 0x00000008 chip_id 0x00000000 sub 0000:0000
kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
firmware ver  api 5 features wowlan,mgmt-tx-by-reference,non-bmi crc32 b3d4b790
htt-ver 3.86 wmi-op 4 htt-op 3 cal file max-sta 32 raw 0 hwcrypto 1

With this patch applied, I no longer see the error message in the commit message, when I unbind/bind when wifi stops working.

Tested-by: Steev Klimaszewski <steev@xxxxxxxx>

-- Steev

Apologies for the second email - I've tested this now on both the Lenovo Flex 5G, as I have seen the issue on it as well, as well as on the Lenovo Yoga C630, where I did not but I did have issues with attempting to rebind the device, prior to this patch.

Firmware version for the Flex 5G is

qmi chip_id 0x30224 chip_family 0x4001 board_id 0xff soc_id 0x40060000
qmi fw_version 0x32080009 fw_build_timestamp 2020-11-16 14:44 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HL.3.2.0.c8-00009-QCAHLSWSC8180XMTPLZ-1

Firmware version on the Yoga C630 is

qmi chip_id 0x30214 chip_family 0x4001 board_id 0xff soc_id 0x40030001
qmi fw_version 0x2009856b fw_build_timestamp 2018-07-19 12:28 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HL.2.0-01387-QCAHLSWMTPLZ-1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux