Add LPASS LPI pinctrl properties, which are required for Audio
functionality on herobrine based platforms of rev5+
(aka CRD 3.0/3.1) boards.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@xxxxxxxxxxx>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 84 ++++++++++++++++++++++++++
1 file changed, 84 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
index 4c4a0e9..1510118 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
@@ -588,6 +588,90 @@ ap_ec_spi: &spi10 {
bias-disable;
};
+&lpass_dmic01 {
+ clk {
+ drive-strength = <8>;
+ };
+};
+
+&lpass_dmic01_sleep {
+ clk {
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ data {
+ pull-down;
+ };
+};
+
+&lpass_dmic23 {
+ clk {
+ drive-strength = <8>;
+ };
+};
+
+&lpass_dmic23_sleep {
+ clk {
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ data {
+ pull-down;
+ };
+};
+
+&lpass_rx_swr {
+ clk {
+ drive-strength = <2>;
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ data {
+ drive-strength = <2>;
+ slew-rate = <1>;
+ bias-bus-hold;
+ };
+};
+
+&lpass_rx_swr_sleep {
+ clk {
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ data {
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+};
+
+&lpass_tx_swr {
+ clk {
+ drive-strength = <2>;
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ data {
+ slew-rate = <1>;
+ bias-bus-hold;
+ };
+};
+
+&lpass_tx_swr_sleep {
+ clk {
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ data {
+ bias-bus-hold;
+ };
+};
+
&mi2s0_data0 {
drive-strength = <6>;
};
--
2.7.4
