Re: [PATCH v1 2/2] drm/msm/dp: do not stop transmitting phy test pattern during DP phy compliance test

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Quoting Kuogee Hsieh (2022-04-25 15:11:03)
> At normal operation, transmit phy test pattern has to be terminated before
> DP controller switch to video ready state. However during phy compliance
> testing, transmit phy test pattern should not be terminated until end of
> compliance test which usually indicated by unplugged interrupt.

And what does the patch do to fix it? We need more details in the commit
text. I think it should continue with:

Only stop sending the train pattern in dp_ctrl_on_stream() if we're not
doing compliance testing. We also no longer reset 'p_level' and
'v_level' because XYZ and it's OK/better to retrain the link after
enabling the stream clks because XYZ.

>
> Fixes: 64e190e720a7 ("drm/msm/dp: DisplayPort PHY compliance tests fixup")

Should be

Fixes: 6625e2637d93 ("drm/msm/dp: DisplayPort PHY compliance tests fixup")

> Signed-off-by: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
> ---
>  drivers/gpu/drm/msm/dp/dp_ctrl.c | 15 +++++++--------
>  1 file changed, 7 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c
> index 193cc1a..f99e173 100644
> --- a/drivers/gpu/drm/msm/dp/dp_ctrl.c
> +++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c
> @@ -1699,8 +1699,6 @@ int dp_ctrl_on_link(struct dp_ctrl *dp_ctrl)
>                 ctrl->link->link_params.rate,
>                 ctrl->link->link_params.num_lanes, ctrl->dp_ctrl.pixel_rate);
>
> -       ctrl->link->phy_params.p_level = 0;
> -       ctrl->link->phy_params.v_level = 0;

Why is this removed? Can you mention in the commit text why we don't
need to zero it out anymore?

>
>         rc = dp_ctrl_enable_mainlink_clocks(ctrl);
>         if (rc)
> @@ -1822,12 +1820,6 @@ int dp_ctrl_on_stream(struct dp_ctrl *dp_ctrl)
>                 }
>         }
>
> -       if (!dp_ctrl_channel_eq_ok(ctrl))
> -               dp_ctrl_link_retrain(ctrl);
> -
> -       /* stop txing train pattern to end link training */
> -       dp_ctrl_clear_training_pattern(ctrl);
> -
>         ret = dp_ctrl_enable_stream_clocks(ctrl);
>         if (ret) {
>                 DRM_ERROR("Failed to start pixel clocks. ret=%d\n", ret);
> @@ -1839,6 +1831,13 @@ int dp_ctrl_on_stream(struct dp_ctrl *dp_ctrl)
>                 return 0;
>         }
>
> +       if (!dp_ctrl_channel_eq_ok(ctrl)) {
> +               dp_ctrl_link_retrain(ctrl);
> +       }

Braces not needed. Please remove.

> +
> +       /* stop txing train pattern to end link training */
> +       dp_ctrl_clear_training_pattern(ctrl);
> +



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux