At normal operation, transmit phy test pattern has to be terminated before DP controller switch to video ready state. However during phy compliance testing, transmit phy test pattern should not be terminated until end of compliance test which usually indicated by unplugged interrupt. Fixes: 64e190e720a7 ("drm/msm/dp: DisplayPort PHY compliance tests fixup") Signed-off-by: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx> --- drivers/gpu/drm/msm/dp/dp_ctrl.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c index 193cc1a..f99e173 100644 --- a/drivers/gpu/drm/msm/dp/dp_ctrl.c +++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c @@ -1699,8 +1699,6 @@ int dp_ctrl_on_link(struct dp_ctrl *dp_ctrl) ctrl->link->link_params.rate, ctrl->link->link_params.num_lanes, ctrl->dp_ctrl.pixel_rate); - ctrl->link->phy_params.p_level = 0; - ctrl->link->phy_params.v_level = 0; rc = dp_ctrl_enable_mainlink_clocks(ctrl); if (rc) @@ -1822,12 +1820,6 @@ int dp_ctrl_on_stream(struct dp_ctrl *dp_ctrl) } } - if (!dp_ctrl_channel_eq_ok(ctrl)) - dp_ctrl_link_retrain(ctrl); - - /* stop txing train pattern to end link training */ - dp_ctrl_clear_training_pattern(ctrl); - ret = dp_ctrl_enable_stream_clocks(ctrl); if (ret) { DRM_ERROR("Failed to start pixel clocks. ret=%d\n", ret); @@ -1839,6 +1831,13 @@ int dp_ctrl_on_stream(struct dp_ctrl *dp_ctrl) return 0; } + if (!dp_ctrl_channel_eq_ok(ctrl)) { + dp_ctrl_link_retrain(ctrl); + } + + /* stop txing train pattern to end link training */ + dp_ctrl_clear_training_pattern(ctrl); + /* * Set up transfer unit values and set controller state to send * video. -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project