On 4/21/2022 9:58 PM, Matthias Kaehlcke wrote: Thanks for your time Matthias!!!
On Thu, Apr 21, 2022 at 08:17:30PM +0530, Srinivasa Rao Mandadapu wrote:Enable rx, tx and va macro codecs and soundwire nodes for CRD rev5 (aka CRD 3.0/3.1) boards. Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx> Co-developed-by: Venkata Prasad Potturu <quic_potturu@xxxxxxxxxxx> Signed-off-by: Venkata Prasad Potturu <quic_potturu@xxxxxxxxxxx> --- arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts | 35 +++++++++++++++++++++++ 1 file changed, 35 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts index fd6eadc..d0794f2 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts @@ -69,6 +69,19 @@ ap_ts_pen_1v8: &i2c13 { }; };+&lpass_rx_macro {+ status = "okay"; +}; + +&lpass_tx_macro { + status = "okay"; +}; + +&lpass_va_macro { + status = "okay"; + vdd-micb-supply = <&vreg_bob>; +}; + /* For nvme */ &pcie1 { status = "okay"; @@ -89,6 +102,28 @@ ap_ts_pen_1v8: &i2c13 { status = "okay"; };+&swr0 {+ status = "okay"; + + wcd_rx: codec@0,4 { + compatible = "sdw20217010d00"; + reg = <0 4>; + #sound-dai-cells = <1>; + qcom,rx-port-mapping = <1 2 3 4 5>; + }; +}; + +&swr1 { + status = "okay"; + + wcd_tx: codec@0,3 { + compatible = "sdw20217010d00"; + reg = <0 3>; + #sound-dai-cells = <1>; + qcom,tx-port-mapping = <1 2 3 4>; + }; +};The wcd9385 is on the qcard, so the wcd_tx/rx nodes should probably be added to sc7280-qcard.dtsi, and the CRD DT would only set 'status'.
Okay. will update accordingly.
