This patch set is to add bolero digital macros, WCD and maxim codecs nodes
for audio on sc7280 based platforms.
This patch set depends on:
-- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=631506
-- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=601249
-- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=634203
-- Clock reset control patches
Changes Since V8:
-- Split patches as per sc7280 CRD revision 3, 4 and 5 boards.
-- Add corresponding dt nodes for herobrine crd boards.
-- Update dai-link node names as per dt-bindings in sound node.
-- Add reg property in sound node as per dt-bindings which was removed in previous series.
-- Fix typo errors.
-- Update wcd codec pin control properties in board specific files.
Changes Since V7:
-- Remove redundant interrupt names in soundwire node.
-- Fix typo errors.
-- Remove redundant reg property in sound node.
-- Rebased on top of latest kernel tip.
Changes Since V6:
-- Modify link-names and audio routing in a sound node.
-- Move amp_en pin control node to appropriate consumer patch.
-- Split patches as per digital macro codecs and board specific codecs and sort it.
-- Modify label and node names to lpass specific.
Changes Since V5:
-- Move soc specific bolero digital codec nodes to soc specific file.
-- Bring wcd938x codec reset pin control and US/EURO HS selection nodes from other series.
-- Change node name and remove redundant status property in sound node.
Changes Since V4:
-- Update nodes in sorting order.
-- Update DTS node names as per dt-bindings.
-- Update Node properties in proper order.
-- Update missing pinctrl properties like US/EURO HS selection, wcd reset control.
-- Remove redundant labels.
-- Remove unused size cells and address cells in tx macro node.
-- Keep all same nodes at one place, which are defined in same file.
-- Add max98360a codec node to herobrine board specific targets.
Changes Since V3:
-- Move digital codec macro nodes to board specific dtsi file.
-- Update pin controls in lpass cpu node.
-- Update dependency patch list.
-- Create patches on latest kernel.
Changes Since V2:
-- Add power domains to digital codec macro nodes.
-- Change clock node usage in lpass cpu node.
-- Add codec mem clock to lpass cpu node.
-- Modify the node names to be generic.
-- Move sound and codec nodes to root node.
-- sort dai links as per reg.
-- Fix typo errors.
Changes Since V1:
-- Update the commit message of cpu node patch.
-- Add gpio control property to support Euro headset in wcd938x node.
-- Fix clock properties in lpass cpu and digital codec macro node.
Srinivasa Rao Mandadapu (12):
arm64: dts: qcom: sc7280: Add nodes for soundwire and va tx rx digital
macro codecs
arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD
1.0 and CRD 2.0
arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD
3.0/3.1
arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 1.0 and CRD
2.0
arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 3.0/3.1
arm64: dts: qcom: sc7280: Add max98360a codec for CRD 1.0 and 2.0
arm64: dts: qcom: sc7280: Add max98360a codec node for CRD 3.0/3.1
arm64: dts: qcom: sc7280: Add lpass cpu node
arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 1.0 and CRD
2.0
arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 3.0/3.1
arm64: dts: qcom: sc7280: Add sound node for CRD 1.0 and CRD 2.0
arm64: dts: qcom: sc7280: Add sound node for CRD 3.0/3.1
arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts | 31 +++
arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts | 213 ++++++++++++++++++++
arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 8 +
arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 225 ++++++++++++++++++++++
arch/arm64/boot/dts/qcom/sc7280.dtsi | 190 ++++++++++++++++++
5 files changed, 667 insertions(+)
--
2.7.4
